Brand: Sparkfun
Model: SEN14518
Description: Fingerprint scanners are awesome! Why use a key when you have one right at the tip of your finger? Unfortunately, they're often unreliable or difficult to implement. Well not anymore! This great GT-521F32 fingerprint module from ADH-Tech communicates over TTL Serial so you can easily em..
50.50€
Ex Tax:40.24€
Brand: Olimex
Model: OL-SNS-MQ2
Description: SNS-MQ2 is a sensor module that detects LPG, propane and hydrogen in the air. It can be used to detect methane and other combustible substances.
Heater voltage 5V, 31 ohm (40mA consumption)
Features:
Detects LPG, propane, hydrogen, methane and other combustible substanc..
7.59€
Ex Tax:6.05€
Brand: DFRobot
Model: DFR0076
Introduction
The flame sensor can be used to detect fire or other wavelength at 760 nm ~ 1100 nm light. In the fire-fighting robot game, the flame plays an important role in the probe, which can be used as the robot's eyes to find fire source or football. It can make use of fire-fighting robots, ..
6.07€
Ex Tax:4.84€
-20 %
Brand: Pololu
Model: POLO/1480+1479
This semiconductor gas sensor detects the presence of combustible gas and smoke at concentrations from 300 to 10,000 ppm. The sensor’s simple analog voltage interface requires only one analog input pin from your microcontroller.
Shipping list: 1 x Flammable Gas & Smoke Sensor MQ-2, 1 x MQ Gas..
5.67€ 7.08€
Ex Tax:4.52€
Brand: Adafruit
Model: ADA-2143
Description: This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
This cable is 1 meter long. We have cables in a ton of si..
6.98€
Ex Tax:5.56€
Brand: Adafruit
Model: ADA-2144
Description: This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
This cable is 2 meters long. We have cables in a ton of s..
10.02€
Ex Tax:7.98€
Brand: Adafruit
Model: ADA-1648
Description: This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
This cable is 300mm long We have cables in 50mm, 100mm, 2..
3.95€
Ex Tax:3.15€
Brand: Waveshare
Model: W14955
Description: Raspberry Pi Camera Cable FFC 60cm. This cable is 600mm long We have cables in 50mm, 100mm, 200mm and 300mm so you can have the perfect fit.
Category: FFC
For use with: Raspberry Pi Cameras
Length: 600mmfor Raspberry Pi 4..
5.97€
Ex Tax:4.76€
Brand: Sparkfun
Model: SEN10264
Description: A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It's so bad!
The resistance of t..
11.03€
Ex Tax:8.79€
Brand: Sparkfun
Model: TOL12783+33
These plastic Flexible Coolant Pipes have been primarily used to spray refrigeration or washing fluid for machine tools but, thanks to their articulation, they can be used in a multitude of different ways as well. We use them as extra arms for our third hand. The coolant pipes are 1ft long with a no..
5.97€
Ex Tax:4.76€
Brand: Sparkfun
Model: SEN11207
Description: This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite to ~50k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pressu..
28.54€
Ex Tax:22.74€
Brand: Sparkfun
Model: KIT15948
Description: Do you see what we see? With the FLIR Radiometric Lepton® Dev Kit v2 you will be able to bring FLIR's thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. This kit includes a breakout..
373.46€
Ex Tax:297.58€