Brand: Sparkfun
Model: DEV13029
Description: As you know, the Arduino micro controller only has a USB port and a TTL UART interface, so if you need an RS232 port directly connected to your Arduino, look no further than the RS232 Shield.
The RS232 serial port used to be the standard connection for most peripheral ports on PCs, b..
18.02€
Ex Tax:14.35€
Brand: Microbot
Model: MR002-001.2
Description: This board is usefull to connect your PC to any digital board that uses a serial port with 3.3V or 5V level. Using a MAX3232C transceiver, this serial adapter can operate with 3,3V and 5V digital signals (it also accepts 5V logic inputs with 3,3V supply).
It meets the requirements of..
11.54€
Ex Tax:9.19€
Brand: Sparkfun
Model: CAB11579
Description: Behold, the Hydra! This USB power cable probably looks a lot like something you've hacked together before. We do it all the time, because what is a computer if not a 5V power supply that happens to run software?
The Hydra brings the 5V and GND lines from your USB power supply, comput..
6.07€
Ex Tax:4.84€
Brand: Sparkfun
Model: BOB12035
Description: This simple board breaks out a micro-B USB connector’s VCC, GND, ID, D- and D+ pins to a 0.1" pitch header. If you want to add the popular micro-B USB to your project, but don’t want to put up with soldering the tiny connector, this is the board for you.
Dimensions: 0.8 x 0.45" (20.3..
2.28€
Ex Tax:1.81€
Brand: Sparkfun
Model: PRT00449
Description: The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice versa (TX and RX). This will allow a microcontroller to communicate with a computer. Shifter SMD is powered from the target application and can ..
19.13€
Ex Tax:15.24€
Brand: Sparkfun
Model: BOB12941
Description: With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to breakout the SD/MMC socket to a standard .1" 10-pin header. Perfect for breadboarding and the likes. Board comes fully assembled and tested as shown.
Dime..
11.34€
Ex Tax:9.03€
Brand: Pololu
Model: USB/1129
This Mini-USB cable is extremely thin (2mm diameter), light, and flexible, which makes it easier to use than bulkier cables that tend to take up more desk space and pull small devices off tables. It is six feet long (1.8 m) and has a male Type-A connector and a male Mini-B connector. Note that this ..
2.99€
Ex Tax:2.38€
Brand: Robomaa.com
Model: RM-USBA-mB
Description: Type-A USB plug and on the other by a MIni-B USB plug..
3.74€
Ex Tax:2.98€
Brand: Robomaa.com
Model: RM-TCAB141
Black USB Cable 2.0 USB A to Micro B 0.1m (10cm)
- Only for charging -..
2.38€
Ex Tax:1.90€
Brand: Robomaa.com
Model: RM-USB-AB5
USB cable 5 meters - Male headers, A to B...
5.01€
Ex Tax:3.99€
Brand: Pololu
Model: POLO/2586
Description: This board breaks out the VBUS, GND, D-, D+ and ID pins of a USB Micro-B connector. The VBUS and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB’s differential data signal. Each of these pins, along with the ID pin, are broken out..
2.28€
Ex Tax:1.81€
Brand: Sparkfun
Model: CAB11604
Description: USB On-The-Go is a really useful USB specification! It allows some small devices that would usually be unable to act as a host to have limited hosting capabilities! USB-OTG is common for things like tablet computers and smartphones in order to allow for USB peripherals like flash-drives..
4.00€
Ex Tax:3.19€