Brand: Pololu
Model: Wheel/1439
These white plastic wheels press fit onto the 3mm D shafts of our mini and micro metal gearmotors to make a nice drive solution for small robots. The wheels have silicone tires and measure 90 mm (3.54") in diameter. Two additional mounting holes make it possible to use the wheel with several of our ..
13.16€
Ex Tax:10.48€
Brand: Dagu Electronics
Model: RS011
Unique and powerful 4WD tracked chassis
Adjustable clearance
Stretchy rubber treads
Comes with four motors and encoders
Speed: 1Km/hr
The Dagu Rover 5 4WD Tracked Chassis w/ Settable Ground Clearance is a unique and powerful tracked chassis. Unlike conventional tracked chassis you can a..
80.87€
Ex Tax:64.44€
Brand: Pololu
Model: POLO/1090
This custom-designed white plastic wheel has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on our micro and mini metal gearmotors as well as the Solarbotics metal gear motors. Teeth on the hub optionally allow a reflectance sensor to be used for encoder f..
8.10€
Ex Tax:6.45€
Brand: DFRobot
Model: SEN0038
Introduction
This encoders are designed for DFRobot 3PA and AWD Rovers. It can give you the rotation degree of the wheels. Encoder uses non-contact method to convert the angular displacement signals. Best fit with Micro DC Geared Motor.
It includes encoders, plastic tube, paper-mediated gasket..
16.29€
Ex Tax:12.98€
Brand: Pololu
Model: POLO/1418
The Pololu Zumo chassis is a small, tracked robot platform that is less than 10 cm on each side, allowing it to qualify for Mini Sumo competitions. The main body is composed of black ABS and features a compartment for four AA batteries and sockets for two micro metal gearmotors. It ships as a kit wi..
23.48€
Ex Tax:18.71€
Brand: Pololu
Model: POLO/2505
Introduction: This tracked robot kit contains most of the parts you need to build an Arduino-controlled Zumo robot. It consists of a Zumo Shield for Arduino, a Zumo chassis kit, and a Zumo blade. You will also need a pair of micro metal gearmotors, four AA batteries, and an Arduino to complete your ..
47.47€
Ex Tax:37.82€
Brand: Waveshare
Model: W16377
Description: Equip your micro:bit with this 4-DOF metal robot arm, and get started to explore the world of artificial intelligent robotic. This starter robotic arm kit includes: servo driver board, metal mechanical arm structure, and 4x metal gear servos. When used with the micro:bit, it is easy to ..
60.62€
Ex Tax:48.31€
Brand: Sparkfun
Model: ROB12089
Description: This is the Multi-Chassis Basic 4WD Kit, an easy to assemble and use robot chassis platform. The Multi-Chassis kit provides you with everything you need to give your robot a fast four wheel drive platform with plenty of room for expansion to add various sensors and controllers. All you ..
46.46€
Ex Tax:37.02€
-15 %
Brand: Sparkfun
Model: ROB12649
Description: The SparkFun Inventor’s Kit for RedBot is a great way to get started with two motor robotics and sensor integration using the Arduino programming language. The SIK for RedBot includes everything you need to complete nine circuits that will teach you how to drive your RedBot, have it fol..
148.27€ 174.59€
Ex Tax:118.15€
Brand: Waveshare
Model: W25377
Description: WAVE ROVER Flexible And Expandable 4WD Mobile Robot Chassis, Full Metal Body, Multiple Hosts Support, With Onboard ESP32 ModuleFeatures at a glance:The WAVE ROVER is a full metal body 4WD mobile robot
chassis, which features superb off-road crossing ability and
shock-absorbing perfo..
131.47€
Ex Tax:104.76€
Brand: Pololu
Model: POLO/953
This ball caster uses a 1/2" diameter metal ball. The height of the assembled kit ranges from 0.5" to 0.8". This ball caster kit includes a black ABS housing, a 1/2" diameter metal ball, two spacers (1/16" and 1/8" thick), and two #2 screw sets. The total height of this ball caster is 0.53" with no ..
6.07€
Ex Tax:4.84€
Brand: Pololu
Model: POLO/952
This light ball caster uses a 1/2" diameter plastic ball. The height of the assembled kit ranges from 0.5" to 0.8". This ball caster kit includes a black ABS housing, a 1/2" diameter plastic ball, two spacers (1/16" and 1/8" thick), and two #2 screw sets. The total height of this ball caster is 0.53..
6.07€
Ex Tax:4.84€