Brand: Olimex
Model: OL-KTY81-3M
Description: PTC thermistor -55+125C with 3 meter cable 2x0.5mm2 suitable for Arduino temperature control..
10.02€
Ex Tax:7.98€
Brand: Olimex
Model: OL-KTY81-1M
Description: PTC thermistor -55+125C with 1 meter cable 2x0.5mm2 suitable for Arduino temperature control..
8.00€
Ex Tax:6.37€
New
Brand: Olimex
Model: OL-MOD-BME280
MOD-BME280 is combined humidity, temperature and pressure sensor
module based on Bosch BME280 sensor. It has two digital interfaces: I2C
(up to 3.4 MHz) and SPI (3/4 wire, up to 10 MHz). Typical use is: Home
automation control, quality of working environment, control heating,
venting, air co..
10.07€
Ex Tax:8.02€
New
Brand: DFRobot
Model: SEN0248
DFRobot BME680 Environmental Sensor is a low power gas, pressure, temperature & humidity sensor based on BOSCH BME680 sensor. It is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidity sensor and barometer.With..
26.21€
Ex Tax:20.89€
New
Brand: Waveshare
Model: W11092
This is a calibrated digital temperature and humidity module with
onboard sensor DHT22, which features higher accuracy and wider measuring
range than DHT11.
It can be used for detecting ambient temperature and humidity, through the standard single-wire interface.Specifications:Temperature:Resol..
12.85€
Ex Tax:10.24€
New
Brand: Sparkfun
Model: SEN18364
The DHT20 is a low cost humidity and temperature sensor with a I2C
digital output protocol. It can be applied to HVAC, dehumidifier,
automatic control, data loggers, weather stations, and many other
projects. The sensor is calibrated and doesn't require extra components
so you can get right ..
9.01€
Ex Tax:7.18€
New
Brand: Olimex
Model: OL-MOD-IR-TEMP
MOD-IR-TEMP is an infra red thermometer based on MLX90614BAA IC. MLX90614BAA is factory calibrated in wide temperature range:
-40 to 125 ̊C for sensor temperature and
-70 to 380 ̊C for object temperature.
VERY IMPORTANT: MOD-IR-TEMP works at 3.3V! Please set your Arduino board to 3.3V opera..
14.68€
Ex Tax:11.69€
Brand: Sparkfun
Model: DEV14629
Description: The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shining on it. As more light is applied on the sensor, more current will flow ..
5.01€
Ex Tax:3.99€
Brand: Adafruit
Model: ADA-1782
Description: This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard i2c. There are 3 address pins so you ca..
8.00€
Ex Tax:6.37€
New
Brand: Sparkfun
Model: SEN14049
The MAX31820 ambient temperature sensor provides
9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy
over a +10°C to +45°C temperature range. Over its entire -55°C to +125°C
operating range, the device has ±2.0°C accuracy.
The device communicates over a one-wire bus that, ..
8.00€
Ex Tax:6.37€
Brand: DFRobot
Model: DFR0066
Description: Here is the most qualified Humidity and Temperature Sensor from DFRobot. Accurate, durable, highly compatible and easy to use, it has all the attributes of a superior sensor requires.
This sensor uses SHT1x sensor. SHT1x is individually calibrated in a precision humidity c..
13.06€
Ex Tax:10.40€
Brand: DFRobot
Model: SEN0385
Description: This is an SHT31 Temperature & Humidity sensor housed in a weather-proof enclosure. The sensor is designed to be waterproof so you can use it safely in outdoor projects. Please note that although the sensor is waterproof, it is not suggested to submerge it in water. For in-water mea..
30.26€
Ex Tax:24.11€