Menu
Your Cart
Welcome to the new Robomaa online store!

Motors, Servos and Drivers

Brand: Waveshare Model: W15364
Description: The Motor Driver HAT is designed for Raspberry Pi, controlled via I2C interface, will drive two DC motors at the same time. It's an ideal choice for you to DIY mobile robots. Comes with RPi screws x 2.Features:Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi seri..
21.05€
Ex Tax:16.77€
Brand: Pololu Model: POLO/2806
Description: The Pololu 4-Channel RC Servo Multiplexer can be used with standard hobby radio control systems and servo controllers to allow easy switching of servo control between two independent sources using a separate auxiliary channel as the input selector. This makes it ideal for applications i..
24.19€
Ex Tax:19.27€
Brand: Pololu Model: POLO/3750
Description: This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic curr..
101.11€
Ex Tax:80.56€
Model: POLO/1110
Description: The qik 2s9v1 is Pololu’s second-generation dual serial motor controller. The compact module allows any microcontroller or computer with a serial port (external RS-232 level converter required) or USB-to-serial adapter to easily drive two small, brushed DC motors with full direction and..
30.26€
Ex Tax:24.11€
Brand: Sparkfun Model: DEV14328
Description: The SparkFun Pi Servo HAT allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an I2C connection. Thanks to its I2C capabilities, this PWM HAT saves the Raspberry Pi’s GPIO, allowing you to use them for other purposes. Additionally,..
14.07€
Ex Tax:11.21€
Brand: Olimex Model: OL-17HS4023
Description: Stepper Motor - NEMA 17HS4023 HARDWARE: Shaft diameter 5mm Shaft Length 21mm 4 wires / 2 Phase Voltage: 12 V Current: 0.7 A / Phase Resistance: 4.0 ± 10% Ω / Phase Inductance: 3.2 ± 20% mH / Phase Holding Torque: 14 N. cm Insulation Class: B Step Angle: 1.8 ± ..
16.09€
Ex Tax:12.82€
Brand: Olimex Model: OL-42HB34F08AB
Description: Stepper Motor - NEMA 42HB34F08AB (17HS3401) HARDWARE: Shaft diameter 5mm Shaft Length 21mm 4 wires / 2 Phase Voltage: 12 V Current: 1.33 A / Phase Resistance: 2.2 ± 10% Ω / Phase Inductance: 2.5 ± 20% mH / Phase Holding Torque: 22 N. cm Insulation Class: B Ste..
16.09€
Ex Tax:12.82€
Brand: Waveshare Model: W15948
Description: SM24240, Two-Phase Stepper Motor Specifications: Category: two-phase stepper motor Step angle: 1.8° Body length: 40mm Rated current: 1.7A/Phase Phase resistance: 2.4Ω Phase inductance: 3.7mH Holding torque: 0.45N.m Rotor inertia: 54(g.c㎡) Weight: 0.3kg Wiring:..
14.07€
Ex Tax:11.21€
Brand: Waveshare Model: W15669
Description: This Stepper Motor HAT gives your Raspberry Pi the ability to drives two stepper motors at the same time, supports up to 1/32 microstepping. Features: Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Onboard dual DRV8825 moto..
35.32€
Ex Tax:28.15€
Brand: Pololu Model: POLO/3134
Description: The Tic family of stepper motor controllers makes it easy to add basic control of a bipolar stepper motor to a variety of projects. These versatile, general-purpose modules support six different control interfaces: USB for direct connection to a computer, TTL serial and I²C for use with..
63.76€
Ex Tax:50.81€
Brand: Pololu Model: POLO/3133
Overview: The Tic family of stepper motor controllers makes it easy to add basic control of a bipolar stepper motor to a variety of projects. These versatile, general-purpose modules support six different control interfaces–USB for direct connection to a computer, TTL serial and I²C for use with a m..
80.46€
Ex Tax:64.11€
Brand: Devantech Model: MD22
Description: The MD22 is a robust low/medium power motor driver, designed to supply power for two motors Voltage - 5v logic supply and 5v - 24v for the motor  Current - 50mA Max for logic and up to 5A for each motor  Control 1 - 2 independent channels of 0v - 2.5v - 5v Analogue for Re..
70.75€
Ex Tax:56.37€
Showing 13 to 24 of 24 (2 Pages)
Cookies
We use cookies to improve your browsing experience and the functionality of our site. These cookies are required for the website to run and cannot be switched off. Such cookie are only set in response to actions made by you such as language (En/Fi), currency (EUR) and login session id which is set by system (OCSESSID). You can set your browser to block these cookies but our site may not work then. Google Analytics (GA4) cookies allow us to measure visitors traffic and see traffic sources by collecting information in data sets. They also help us understand which products and actions are more popular than others. We do not share these information with Google.