Brand: Sparkfun
Model: PRT07942
Description: Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are! Number of pins include: 8, 14, 16, 18, 28, and 40.
This is a 300mil wide 28-pin socket...
1.01€
Ex Tax:0.81€
Brand: Sparkfun
Model: PRT07944
Description: Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are!
This is a 600mil wide 40-pin socket...
1.62€
Ex Tax:1.29€
Brand: Sparkfun
Model: COM08034
Description: DIP switch with 8 individual switch positions. The pins have .1" spacing - fits great into a breadboard! Works great as general control switches.
Documents: Datasheet..
2.00€
Ex Tax:1.59€
Brand: Pololu
Model: DRV8833/2130
This tiny breakout board for TI’s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an operating voltage range from 2.7 to 10.8 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver..
8.10€
Ex Tax:6.45€
Brand: Pololu
Model: POLO/2134
Description: This product is a carrier board or breakout board for TI’s DRV8834 low-voltage stepper motor driver; we therefore recommend careful reading of the DRV8834 datasheet (2MB pdf) before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 ..
13.15€
Ex Tax:10.48€
Brand: DFRobot
Model: DFR0024
Introduction: While there are many types of temperature sensors available in the market, the DS18B20 Temperature Sensor form DALLAS is the best choice in applications which require high accuracy and high reliability. Its ultra-small size, low hardware overhead, strong anti-interference capability an..
7.08€
Ex Tax:5.65€
Brand: Devantech
Model: dS3484C
Description: dS3484 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS3484 module. Supplied as a case only, the dS3484 module should be ordered separately...
29.25€
Ex Tax:23.31€
Brand: Devantech
Model: dS378C
Description: dS378 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS378 module. Supplied as a case only, the dS378 module should be ordered separately...
31.27€
Ex Tax:24.92€
Brand: DFRobot
Model: DRI0023
INTRODUCTION: Do you want to do some projects with stepper motors such as a drafting instrument, a 3D printer, an auto curtain......? As we all know, regular stepper motors are hard to drive, but with this stepper motor shield, you can easily drive 2 stepper motors via just 6 digital I/O pins. This ..
46.46€
Ex Tax:37.02€
Brand: Microbot
Model: MR007-001.1
Description: The Dual DC Motor Shield is a shield that has been projected to enable an Arduino board to drive two brushed DC motors or one 4-wire two-phase stepper motor, controlling the speed and direction of each one independently.
Some applications may need to control the motor speed or a serv..
27.23€
Ex Tax:21.69€
Brand: Sparkfun
Model: LCD10150
Description: E-paper displays are rad. They can maintain an image even after power has been removed. They also have very high contrast and low power consumption. This particular display is a 10x2 character display, allowing you to display up to 20 characters.
Check the datasheet below for informa..
28.54€
Ex Tax:22.74€
Brand: Sparkfun
Model: BOB10304
Description: E-paper displays are rad. But those 26-pin SMD connectors can be a real pain to solder, so we put together a breakout board to help you integrate this very cool technology into your next project. This board breaks out all of the major pins from the e-paper ribbon connector to a 0.1" pit..
17.41€
Ex Tax:13.87€