Brand: Robomaa.com
Model: RM-POW9/2
Description: Power Supply, 9V 2A, Euro
Output Voltage Nom: 9V
Output Current Max: 2A
Output Connector: 5,5/2,1
Plug Type: EU..
12.05€
Ex Tax:9.60€
Brand: Wanjie Electronic
Model: BB-601-WHITE
Micro-size breadboard, attach to small robot for example.
Tie-point 170
ABS-plastic
Color: white
Dimensions: 45x34.5x8.5mm..
3.04€
Ex Tax:2.42€
Brand: Devantech
Model: SRF10
Photo shows size of the SRF10 compared with the SRF04
Voltage - 5v only required
Current - 15mA Typ. 3mA Standby.
Frequency - 40KHz
Range - 6cm - 6m.
Max Analogue Gain - Variable 40 to 700 in 16 steps.
Connection - Standard I2C Bus.
Timing - Fully timed echo, freeing host controller of ta..
45.44€
Ex Tax:36.21€
Brand: Devantech
Model: SRF04
SRF04 is a great ranger for basic usage.
Range - 3cm to 3m
Power - 5v, 30mA Typ.
Frequency - 40KHz.
Size - 43mm x 20mm x 17mm height.
The input Trigger is a 10uS Min. TTL level pulse. Echo Pulse is Positive TTL level signal, with the width proportional to the object range...
26.21€
Ex Tax:20.89€
Brand: Devantech
Model: SRF06
Introduction
The SRF06 is a low cost ultrasonic ranger with a 4-20mA current output. The SRF06 is powered from the 4-20mA current loop and requires no other power. Measurement range is from 2cm to 5.1mtrs. Current output is from 4mA at zero range to 20mA at 5.1mtrs (510cm), which gives a nominal ..
23.38€
Ex Tax:18.63€
Brand: Devantech
Model: SRF485
Designed for use in car parks, the SRF485 is suitable for use whenever a large number of sonar's are required. This sonar has 3 user programmable Led indicator outputs available.
Overview
The SRF485 is a single transducer ultrasonic ranger, based on our original SRF02 design. The SRF485 uses t..
29.55€
Ex Tax:23.55€
Brand: Devantech
Model: SRF485WPR
Designed for use in car parks, the SRF485 is suitable for use whenever a large number of sonar's are required.
Overview
The SRF485WPR is a water resistant single transducer ultrasonic ranger. The SRF485WPR uses the RS485 standard for communications, for up to 127 modules on each RS485 bus. The..
40.38€
Ex Tax:32.18€
Brand: Pololu
Model: POLO/953
This ball caster uses a 1/2" diameter metal ball. The height of the assembled kit ranges from 0.5" to 0.8". This ball caster kit includes a black ABS housing, a 1/2" diameter metal ball, two spacers (1/16" and 1/8" thick), and two #2 screw sets. The total height of this ball caster is 0.53" with no ..
6.07€
Ex Tax:4.84€
Brand: Pololu
Model: POLO/952
This light ball caster uses a 1/2" diameter plastic ball. The height of the assembled kit ranges from 0.5" to 0.8". This ball caster kit includes a black ABS housing, a 1/2" diameter plastic ball, two spacers (1/16" and 1/8" thick), and two #2 screw sets. The total height of this ball caster is 0.53..
6.07€
Ex Tax:4.84€
Brand: Pololu
Model: POLO/951
This small ball caster uses a 3/8" diameter metal ball. The height of the assembled kit ranges from 0.4" to 0.6". This ball caster kit includes a black ABS housing, a 3/8" diameter metal ball, two spacers (1/16" and 1/8" thick), and two #2 screw sets. The total height of this ball caster is 0.4" wit..
5.06€
Ex Tax:4.03€
Brand: Pololu
Model: POLO/956
This light ball caster uses a 1" diameter plastic ball. The height of the assembled kit ranges from 1.1" to 1.4". Dowel pins are used to minimize the friction between the ball and the ABS housing. This ball caster kit includes a black ABS housing, a 1/2" diameter plastic ball, two spacers (1/16" and..
8.10€
Ex Tax:6.45€
Brand: Pololu
Model: POLO/955
This light ball caster uses a 3/4" diameter metal ball. The height of the assembled kit ranges from 0.8" to 1.1". This ball caster kit includes a black ABS housing, a 1/2" diameter metal ball, two spacers (1/16" and 1/8" thick), and two #2 screw sets. The total height of this ball caster is 0.83" wi..
6.98€
Ex Tax:5.56€