Brand: Olimex
Model: OL-42HB34F08AB
Description: Stepper Motor - NEMA 42HB34F08AB (17HS3401)
HARDWARE:
Shaft diameter 5mm
Shaft Length 21mm
4 wires / 2 Phase
Voltage: 12 V
Current: 1.33 A / Phase
Resistance: 2.2 ± 10% Ω / Phase
Inductance: 2.5 ± 20% mH / Phase
Holding Torque: 22 N. cm
Insulation Class: B
Ste..
16.09€
Ex Tax:12.82€
Brand: Waveshare
Model: W15948
Description: SM24240, Two-Phase Stepper Motor
Specifications:
Category: two-phase stepper motor
Step angle: 1.8°
Body length: 40mm
Rated current: 1.7A/Phase
Phase resistance: 2.4Ω
Phase inductance: 3.7mH
Holding torque: 0.45N.m
Rotor inertia: 54(g.c㎡)
Weight: 0.3kg
Wiring:..
14.07€
Ex Tax:11.21€
Brand: Waveshare
Model: W15669
Description: This Stepper Motor HAT gives your Raspberry Pi the ability to drives two stepper motors at the same time, supports up to 1/32 microstepping.
Features:
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Onboard dual DRV8825 moto..
35.32€
Ex Tax:28.15€
Brand: Pololu
Model: POLO/1207
Description: This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing for a holding torque of 650 g-cm (9 oz-in). The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue conn..
28.25€
Ex Tax:22.51€
New
Brand: Pololu
Model: POLO/2267
This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the o..
31.80€
Ex Tax:25.34€
-25 %
Brand: Waveshare
Model: W21766
The Stripe Aluminum Cooling Case for Raspberry Pi 4 Built-In Active Radiator w/ Fins is designed for Raspberry Pi 4 (not included). It comes with a cooling Fan and is made from Aluminum Alloy.Material: Aluminum AlloyComes with a cooling FanStyle: Exquisite stripedBuilt-in active radiator with Fins..
11.17€ 14.90€
Ex Tax:8.90€
Brand: DFRobot
Model: DRI0043
Description: What is a stepper motor?
Stepper motor is a brushless DC electric motor that divides a full rotation into a number of equal steps The motor's position can then be commanded to move and hold at one of these steps.
How to control a stepper motor? The fast way to control a stepper moto..
27.23€
Ex Tax:21.69€
Brand: Olimex
Model: OL-SNS-TMP10K
Description: Temperature sensor for temperatures in range -30+110°C with 1% precision. Perfect for measuring of fluids, air temperature, refrigrrators, freezers, water heaters, incubators etc. The resistance is 10K ±1% at 25C. The resistance goes down when warmer and up when colder.
Features:
..
2.99€
Ex Tax:2.38€
Brand: DFRobot
Model: DFR0924
Description: This Raspberry Pi Pico terminal expansion board is just right for makers who love using terminal blocks for wiring up their projects! The board has all pins of Pico broken out into terminal blocks and provides users with additional GDI, 5V output, and 7-24 power input. Each port is labe..
28.24€
Ex Tax:22.50€
Brand: Sparkfun
Model: SEN14588
Description: The TFMini is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 30 centimeters and as far as 12 meters! As with all LiDAR sensors, your effective detection distance will vary depending on lighting conditions and the reflectivity of your targe..
62.65€
Ex Tax:49.92€
Brand: Sparkfun
Model: SEN14786
Description: The TFMini is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 30 centimeters and as far as 12 meters! As with all LiDAR sensors, your effective detection distance will vary depending on lighting conditions and the reflectivity of your targe..
61.50€
Ex Tax:49.00€
Brand: Sparkfun
Model: SEN00251
Description: 36" high temperature Type-K Thermocouple with glass braid insulation.
Features:
Type-K Thermocouple (Ni-Cr)
30 gauge stripped and prepped wires
Thermocouple range : -270 to +1372C (-454 to +2501F)
Glass braid insulation range : -73 to +482C(-100 to +900F)
Yellow + / Red..
19.13€
Ex Tax:15.24€