Brand: Sparkfun
Model: SEN14480
Description: The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power, high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes, the H3LIS331DL is great for grueling conditions that normal accelerometers aren’t suited for. With..
12.75€
Ex Tax:10.16€
Brand: Sparkfun
Model: SEN13963
Description: The LIS3DH Breakout is a smart, low-power, three-axis, capacitive micro-machined accelerometer with 12 bits of resolution that you can use to add translation detection to your project. It would be classified as a 3DoF, or 3 Degrees of Freedom. Inertial Measurement Units (or IMUs) can pr..
9.01€
Ex Tax:7.18€
Brand: Sparkfun
Model: BOB13926
Description: This breakout board makes it easy to use the tiny MMA8452Q accelerometer in your project. The MMA8452Q is a smart, low-power, three-axis, capacitive MEMS accelerometer with 12 bits of resolution. This accelerometer is packed with embedded functions with flexible user-programmable option..
15.08€
Ex Tax:12.02€
Brand: Sparkfun
Model: BOB12731
Description: This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI, with an internal oscillator, EEPROM, and a 28-pin SSOP package this is a serious little chip.
With t..
22.16€
Ex Tax:17.66€
Brand: Sparkfun
Model: BOB13830
↵
Descrition: The CY7C65213 USB to UART serial breakout is designed to provide users with a means to access all available I/O pins on the IC, and to provide a 6-pin UART header that is compatible with other SparkFun breakout boards. This breakout has a microUSB connector and other sup..
16.09€
Ex Tax:12.82€
Brand: Sparkfun
Model: BOB15100
Description: With this USB breakout you will finally be able to incorporate a USB-C connector into your projects without needing to solder each tiny SMD pad. The SparkFun USB-C Breakout supplies up to three times the power as previous USB iterations and also solves the universally frustrating dilemm..
7.00€
Ex Tax:5.58€
Brand: Sparkfun
Model: KIT14051
Description: The SparkFun Wireless Joystick Kit provides an easy way to control your next XBee project. Before the wireless joystick, radio-controlled projects used hobby RC transmitters, the same ones used for RC cars, boats and planes. The problem with these transmitters is that many aren’t custom..
43.42€
Ex Tax:34.60€
Brand: Sparkfun
Model: KIT15936
Description: This is the SparkFun XBee 3 Wireless Kit, the perfect box full of goodies to get you started using XBees. Inside this kit you will find two XBee 3 Modules, one XBee Explorer, one Xbee Shield and a set of Arduino R3 headers to solder onto the shield. Our entire goal for the XBee Kit was ..
111.23€
Ex Tax:88.63€
Brand: Sparkfun
Model: COM11089
Description: This through-hole speaker is great for projects where you need something that sounds better than a piezo buzzer but don't have room for a full-blown speaker. This 30mm diameter speaker is encased in plastic and will handle about 100mW of power.
Features:
8 ohm0.1W (0.2..
3.54€
Ex Tax:2.82€
Brand: Sparkfun
Model: SEN13835
Description: The SST Liquid Level Sensor provides single point liquid detection via a TTL compatible push/pull output. This optical liquid level sensor features a miniature design that allows for installation in areas where space is limited. Thanks to its minimal solid state design, this sensor has ..
34.31€
Ex Tax:27.34€
Brand: Olimex
Model: OL-MOD-LED8x8
Description: MOD-LED8x8 is a LED stackable matrix which allows you to make a LED array display of any size by stacking a couple of them (snap-on) together. It stacks with a MSP430-LED8x8-BOOSTERPACK which controls it and with additional MOD-LED8x8 you can make a LED array display of any size which t..
9.01€
Ex Tax:7.18€
Brand: Olimex
Model: OL-17HS4023
Description: Stepper Motor - NEMA 17HS4023
HARDWARE:
Shaft diameter 5mm
Shaft Length 21mm
4 wires / 2 Phase
Voltage: 12 V
Current: 0.7 A / Phase
Resistance: 4.0 ± 10% Ω / Phase
Inductance: 3.2 ± 20% mH / Phase
Holding Torque: 14 N. cm
Insulation Class: B
Step Angle: 1.8 ± ..
16.09€
Ex Tax:12.82€