Brand: Pololu
Model: POLO/1944
These hexagonal male-female aluminum standoffs keep parts spaced 1.0" (25 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 2-56 threads. The standoffs are sold in packs of 4...
2.02€
Ex Tax:1.61€
Brand: Pololu
Model: POLO/1951
These hexagonal male-female aluminum standoffs keep parts spaced 1.25" (32 mm) apart and are great for building a multi-level robot chassis. Both ends of these 3/16"-wide standoffs have 4-40 threads. The standoffs are sold in packs of 4...
2.18€
Ex Tax:1.73€
Brand: Adafruit
Model: ADA-3721
Description: This little sensor looks an awful lot like the popular DHT11/DHT22 temperature and humidity sensors, but unlike classic DHT sensors, it has an I2C interface! That's right, you do not need to use a bit-bang timing-specific protocol to talk to the AM2320, it uses plain-old-I2C. ..
6.98€
Ex Tax:5.56€
Brand: Microbot
Model: MR003-008.2
Description: This ambient light sensor carries the TEMT6000 phototransistor. The phototransistor is connected to a pull-down resistor to form a voltage divider that produces an analog voltage output between 0V and +5V as a function of the light detected in the visible spectrum. Lower output voltage ..
5.01€
Ex Tax:3.99€
Brand: DFRobot
Model: DFR0026
Introduction: Here comes DFRobot's new Analog Ambient Light Sensor. Brand new design and much more convenient to use.This module help you to detect the light density and reflect the analog voltage signal back to Arduino controller. You can set the threshold of voltage level to trig other unit on Ard..
5.01€
Ex Tax:3.99€
Brand: DFRobot
Model: DFR0034
Introduction
This small breakout board couples a small electret microphone with a 100x opamp to amplify the sounds of voice, door knocks, etc loud enough to be picked up by a microcontrollers Analog to Digital converter. Unit comes fully assembled as shown.
Specification
Interface Type: ..
8.00€
Ex Tax:6.37€
Brand: Devantech
Model: TSA01
The TSA01 is a voltage output temperature sensor module employing Microchip's MCP9700A sensor.
Specification:
Operating Voltage: 2.3v to 5.0v
Operating Current: 6uA (typical)
Output: 10.0 mV/..
10.02€
Ex Tax:7.98€
Brand: Sparkfun
Model: GPS00177
Description: Embedded antenna for small, mobile applications. Basic unpackaged antenna with LNA. 5inch cable terminated with standard male SMA connector. Match it with any SMA interface cable to create a truly small GPS prototype!
This unit works very well out of the box, but the fully packaged a..
14.07€
Ex Tax:11.21€
Brand: Sparkfun
Model: COM09136
Description: This is a heavy-duty joystick very similar to the ones in claw arcade games. Directional movements are momentary limit switches - one for each direction. This joystick also has a select button that is actuated when the red button is pressed down.
This joystick is pretty beefy and ver..
24.19€
Ex Tax:19.27€
Brand: Sparkfun
Model: COM09182
Description: 4-way Pacman type arcade joystick. Heavy duty design gives this joystick a great feel!
Features:
ABS plastic and solid alloy construction
Uses 4 microswitches to detect on/off position
Unique handle design
Spring return to center
Very rugged construction
Dimensions..
19.94€
Ex Tax:15.89€
-28 %
Brand: Robomaa.com
Model: 9789529298136
Arduino, perusteista hallintaan: Maailman myydyin Arduino-opas - Getting Started with Arduino - nyt Suomeksi!
Arduino on avoin elektroniikan kehitysalusta, jonka suosio on kasvanut räjähdyksenomaisesti elektroniikan harrastajien keskuudessa kaikkialla maailmassa.
Tämä perusteellinen johdanto A..
17.90€ 24.90€
Ex Tax:16.27€
Brand: Arduino
Model: A000096
The Arduino Graphic LCD (GLCD) screen is a backlit TFT LCD screen with headers. You can draw text, images, and shapes to the screen with the GLCD library.
There is an onboard micro-SD card slot on the back of the screen that can, among other things, store bitmap images for the screen to display.
..
28.24€
Ex Tax:22.50€