Brand: Sparkfun
Model: COM16566
Description: The SparkFun Qwiic Quad Relay is a unique power accessory board that
has been designed for switching not one but four high powered devices
from your Arduino or another low powered microcontroller using I2C.
Taking a look at the board, the Quad Relay has four individual relays
ra..
45.44€
Ex Tax:36.21€
Brand: Sparkfun
Model: KIT16833
Description: The SparkFun Qwiic Quad Solid State Relay Kit takes one of our favorite solid state relays and lets you place up to four of them on a single PCB to control all of them via I2C from your desired microcontroller. Each relay is rated to 40A @ 28-380 VAC so with all four on board you can co..
60.62€
Ex Tax:48.31€
Brand: Sparkfun
Model: DEV14352
Description: The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-based device. This shield connects the I2C bus on your Arduino to a series of SparkFun Qwiic connectors and provides the circuitry to convert the 5..
9.01€
Ex Tax:7.18€
Brand: Sparkfun
Model: COM15093
Description: Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with the easiest to use relay yet. The Single Relay board can handle up to..
18.12€
Ex Tax:14.44€
Brand: Sparkfun
Model: SEN16294
Description: The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C
interface, accessed over our Qwiic system. Inside the chip are two
temperature sensors, one for the thermocouple itself (the hot junction)
and one for the chip itself (the cold junction). As a resu..
40.38€
Ex Tax:32.18€
Brand: Sparkfun
Model: SEN16295
Description: The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C
interface, accessed over our Qwiic system. Inside the chip are two
temperature sensors, one for the thermocouple itself (the hot junction)
and one for the chip itself (the cold junction). As a resu..
30.26€
Ex Tax:24.11€
Brand: Sparkfun
Model: COM16988
Description: The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses NXP’s PCA9615 IC, which converts the two default I2C
signals into four differential signals, two for SCL and two for SDA.
The differential signals are s..
15.89€
Ex Tax:12.66€
Brand: Sparkfun
Model: COM18000
Description: The SparkFun QwiicBus MidPoint works in tandem with the QwiicBus Endpoint so you can extend the range of your I2C
bus and easily tap into it to drop in devices wherever you would like.
The QwiicBus uses NXP’s PCA9615 IC, which converts the two default I2C
signals into four differe..
30.26€
Ex Tax:24.11€
Brand: Sparkfun
Model: DEV15444
Description: Think of the RedBoard Artemis as just another Arduino... That has BLE. And one megabyte of flash. And runs at less than 1mA. Oh, and it can run TensorFlow models. Ya, that too. The RedBoard Artemis takes the incredibly powerful Artemis module from SparkFun and wraps it up in an easy to ..
25.20€
Ex Tax:20.08€
-23 %
Brand: Sparkfun
Model: DEV15442
Description: The RedBoard Artemis ATP is affectionately called 'All the Pins!' at SparkFun. The Artemis module has 48 GPIO and this board breaks out absolutely every one of them in a familiar Mega like form factor. What's with the silkscreen labels? They're all over the place. We decided to label th..
27.33€ 35.32€
Ex Tax:21.77€
Brand: Sparkfun
Model: DEV15443
Description: We like to joke the Artemis Nano is a party on the front and business on the back. And that's by design! All the important LEDs, connectors, labels, and buttons are presented on the front for the best user experience with all the supporting circuitry on the rear of the board. The RedBoa..
22.16€
Ex Tax:17.66€
-20 %
Brand: Sparkfun
Model: DEV14525
Description: The SparkFun RedBoard Edge is a nifty little rework of the SparkFun RedBoard designed to be panel mounted in your custom project enclosure to allow for an easy way to make a clean, finished looking product. It has all the features of a normal RedBoard and is just as easy to use, even al..
16.09€ 20.14€
Ex Tax:12.82€