Brand: Sparkfun
Model: DEV16402
Description: The SparkFun MicroMod Teensy Processor leverages the awesome
computing power of the NXP iMXRT1062 chip and pairs it with the M.2
MicroMod connector to allow you to plug it into your choice of
compatible MicroMod Carrier Board. With the M.2 MicroMod connector,
connecting your Tee..
30.26€
Ex Tax:24.11€
Brand: Sparkfun
Model: DEV18771
Description: The SparkFun MicroMod Teensy Processor with Copy Protection leverages the awesome computing power of the NXP iMXRT1062 chip and pairs it with the M.2 MicroMod connector to allow you to plug it into your choice of compatible MicroMod Carrier Board. This "copy protection" variant comes wi..
34.31€
Ex Tax:27.34€
Brand: Sparkfun
Model: SEN16794
The MicroMod Weather Carrier Board is a peripheral for the MicroMod
ecosystem that allows you to create your own weather station with one of
a multitude of processors. The carrier board includes three sensors:
the BME280 temperature, pressure and humidity sensor, the VEML6075 UV
sensor and t..
57.49€
Ex Tax:45.81€
Brand: Sparkfun
Model: WRL18594
Description: The SparkFun MicroMod DA16200 Function Board adds a fully integrated WiFi module with a 40MHz crystal oscillator, 32.768KHz RTC, Lumped RF filter, 4MB flash memory, and an on-board chip antenna to any MicroMod project. With the addition of JTAG connectors for deep dive programming, you'..
39.17€
Ex Tax:31.21€
Brand: Sparkfun
Model: WRL18430
Description: The SparkFun MicroMod ESP32 Function Board adds additional wireless
options to MicroMod Processor Boards that do not have that capability.
This special function board acts as a coprocessor that takes advantage
of Espressif's ESP32 WROOM to add WiFi and Bluetooth® to your
applica..
21.76€
Ex Tax:17.34€
Brand: Sparkfun
Model: ROB14450
Description: The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controll..
16.09€
Ex Tax:12.82€
Brand: Sparkfun
Model: PRT15353
Description: Sometimes we want our projects on, but sometimes we want to turn them off for a while to save power. The SparkFun Nano Power Timer will run while only consuming minimal power (approximately 35nA) and turn your project on after a set amount of time. When you are done polling your sensors..
9.01€
Ex Tax:7.18€
Brand: Sparkfun
Model: WRL21327
Description: The SparkFun IN100 NanoBeacon Board offers a 2.4 GHz wireless low-energy BT beacon breakout with exceptionally low power consumption features and minimal programming required. The board features the IN100 NanoBeacon™ from InPlay™ that is compliant with several standard 2.4 GHz protocols..
8.00€
Ex Tax:6.37€
Brand: Sparkfun
Model: WRL21293
Description: The SparkFun IN100 NanoBeacon Lite Board offers the ubiquitous 2.4 GHz wireless low-energy BT beacon breakout with exceptionally low power consumption features and minimal programming required. The board features the IN100 NanoBeacon™ from InPlay™ that is compliant with several standard..
9.01€
Ex Tax:7.18€
Brand: Sparkfun
Model: WRL13990
Description: The nRF52832 is Nordic Semiconductor’s latest multiprotocol radio System on Chip (SoC). It’s half microcontroller, with a list of features including 32 configurable I/O pins, SPI, I2C, UART, PWM, ADC’s, 512kB flash, and 64kB RAM. And it’s half 2.4GHz multiprotocol radio, supporting Blue..
25.20€
Ex Tax:20.08€
Brand: Sparkfun
Model: DEV16832
Description: The SparkFun OpenLog Artemis is an open source data logger that comes
preprogrammed to automatically log IMU, GPS, serial data, and various
pressure, humidity, and distance sensors. All without writing a single
line of code! OpenLog Artemis, or "OLA," automatically detects,
conf..
69.73€
Ex Tax:55.56€
Brand: Sparkfun
Model: BOB09118
Description: This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. This board electrically isolates a controller from the high-power system by use of an opto-isolator IC. This IC has two LEDs a..
6.02€
Ex Tax:4.80€