Brand: DFRobot
Model: SEN0171
Description: PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. For that reason they are commonly found in appliances and gadgets used in homes or busine..
8.00€
Ex Tax:6.37€
Brand: Adafruit
Model: ADA-2441
↵
Description: Is this not the cutest, little display for the Raspberry Pi? It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered specifically to work with the newer "2x20 connector" Raspber..
55.56€
Ex Tax:44.27€
Brand: Waveshare
Model: W16958
Description: This is a Raspberry Pi NFC HAT based on PN532 operating in the 13.56MHz frequency range. It supports three communication interfaces: I2C, SPI, and UART. NFC (Near Field Communication) is a wireless technology allows contactless point-to-point data communication between devices within a ..
28.24€
Ex Tax:22.50€
Brand: Olimex
Model: OL-MOD-POEV2
Description: The MOD-POE-V2 board extracts power from the UTP LAN cable network, so you can power your embedded device with 5 or 12VDC, and power and Ethernet are carried at the same cable. Note that the LAN cable should be connected to a PoE-compatible switch/router.
IMPORTANT NOTE! The MOD-POE-..
29.25€
Ex Tax:23.31€
Brand: Pololu
Model: POLO/2806
Description: The Pololu 4-Channel RC Servo Multiplexer can be used with standard hobby radio control systems and servo controllers to allow easy switching of servo control between two independent sources using a separate auxiliary channel as the input selector. This makes it ideal for applications i..
24.19€
Ex Tax:19.27€
Brand: Pololu
Model: POLO/2565
Description: This powerful boost regulator efficiently generates an output voltage of 5 V from an input voltage as low as 2.9 V while allowing an input current as high as 5 A.
Features:
Input voltage: 2.9 V to VOUT
Fixed 5 V output with 4% accuracy
5 A swit..
48.48€
Ex Tax:38.63€
New
Brand: Pololu
Model: POLO/2858
The D24V22Fx family of step-down voltage regulators generates lower
output voltages from input voltages as high as 36 V. They are
synchronous switching regulators (also called switched-mode power
supplies (SMPS) or DC-to-DC converters) with typical efficiencies of 85%
to 95%, which is ..
24.90€
Ex Tax:19.84€
New
Brand: Pololu
Model: POLO/2850
The D24V25Fx family of step-down voltage regulators generates lower
output voltages from input voltages as high as 38 V. They are switching
regulators (also called switched-mode power supplies (SMPS) or DC-to-DC
converters) with typical efficiencies between 85% and 95%, which is
much m..
28.95€
Ex Tax:23.07€
Brand: Pololu
Model: POLO/2116
Desciption: These boost (step-up) voltage regulators generate higher output voltages from input voltages as low as 2.5 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 80% to 90%. The available output..
10,119.96€
Ex Tax:8,063.71€
New
Brand: Pololu
Model: POLO/2573
These step-up/step-down regulators take an input voltage from 3 V to
30 V and increase or decrease it as necessary to produce an adjustable 4 V to 12 V or 9 V to 30 V
output, depending on the version. They are switching regulators (also
called switched-mode power..
48.50€
Ex Tax:38.65€
Brand: Pololu
Model: POLO/3750
Description: This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic curr..
101.11€
Ex Tax:80.56€