Brand: Pololu
Model: Current-1186
This board is a simple carrier of Allegro’s 30A ACS715 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS. This version accepts a unidirectional current input up to 30 A and outputs a proportional analog voltage (13..
12.15€
Ex Tax:9.68€
Brand: Adafruit
Model: ADA-1411
Description: You want to make a cool Arduino robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that the Arduino has only a few PWM outputs, and maybe those outputs are conflicting..
24.19€
Ex Tax:19.27€
Brand: Adafruit
Model: ADA-2472
Description: If you've ever ordered and wire up a 9-DOF sensor, chances are you've also realized the challenge of turning the sensor data from an accelerometer, gyroscope and magnetometer into actual "3D space orientation"! Orientation is a hard problem to solve. The sensor fusion algorithms (the se..
50.50€
Ex Tax:40.24€
Brand: Adafruit
Model: ADA-3010
Description: Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-c..
42.41€
Ex Tax:33.79€
Brand: Adafruit
Model: ADA-2488
Description: This is the Adafruit METRO Arduino-Compatible - with headers. It's a fully assembled and tested microcontroller and physical computing board with through-hole headers attached.
The METRO works great with the Arduino IDE, and runs the ATmega328P at 16MHz so it is shape..
25.20€
Ex Tax:20.08€
Brand: Adafruit
Model: ADA-3505
Description: Metro is our series of microcontroller boards for use with the Arduino IDE. This new Metro M0 Express board looks a whole lot like our original Metro 328, but with a huge upgrade. Instead of the ATmega328, this Metro features a ATSAMD21G18 chip, an ARM Cortex M0+. It's our first Me..
30.26€
Ex Tax:24.11€
Brand: Adafruit
Model: ADA-1272
Description: Brand new and better than ever, we've replaced our Adafruit GPS shield kit with this assembled shield that comes with an Ultimate GPS module. This GPS shield works great with either UNO or Leonardo Arduinos and is designed to log data to an SD card. Or you can leave the SD card out and ..
56.58€
Ex Tax:45.08€
Brand: Seeedstudio
Model: OL-SNS-IR-3-80
Description: SNS-IR-3-80 is an infrared distance switch. It has an adjustable detection range, 3cm - 80cm. It is small, easy to use/assemble, inexpensive. Useful for robot, interactive media, industrial assembly line, etc.
Features:
operating voltage 5VDC
consumption 50mA
diameter 18 mm..
12.20€
Ex Tax:9.72€
Brand: Pololu
Model: POLO/2118
Overview: The Pololu step-up/step-down voltage regulator S7V8A is a switching regulator (also called a switched-mode power supply (SMPS) or DC-to-DC converter) that uses a buck-boost topology. It takes an input voltage from 2.7 V to 11.8 V and increases or decreases the voltage to a user-adjustable ..
17.81€
Ex Tax:14.19€
Brand: DFRobot
Model: DFR0075
Introduction
This keyboard uses an analog input to read the five key state which saves IO resource for the Arduino. It can be used together with our I/O expansion boards to make amazing interactive project.
Specifications
Supply voltage: voltage controller
Interface: Analog
Size: 55x..
8.05€
Ex Tax:6.41€
Brand: Olimex
Model: OL-SNS-MQ135
Description: SNS-MQ135 is sensitive air quality sensor that detects NH3, NOx, alcohol, benzene, smoke, CO2, etc.
Heater voltage 5V, 31 ohm (40mA consumption)
Features:
Detects NH3, NOx, alcohol, benzene, smoke, CO2, etc.
Operating voltage 5V
Operating current 40mA
Both digital..
9.11€
Ex Tax:7.26€
Brand: DFRobot
Model: FIT0191
INTRODUCTION: This AL Heat Sink(With adhesive tape) and a U.S. made 3M-8810 thermal adhesive tape on the back of the heatsink. So you don't require a coat layer of heat conduction glue on the heatsink. Just remove the blue protective film on the thermal adhesive tap and then stick in the desired chi..
1.52€
Ex Tax:1.21€