Brand: Olimex
Model: OL-NANO-BLE
Description: Allows BLE devices as iPhone, Samsung Galaxy, etc to connect to Arduino boards. Works with OLIMEXINO-NANO.
Faetures:
nRF8001 Bluetooth v4 low-energy transciever
connectors for OLIMEXINO-NANO
easier access to signals
3.3V operating voltage
PCB: two layer FR-4, 1.5 mm (0,..
16.09€
Ex Tax:12.82€
Brand: Olimex
Model: OL-NANO
Description: Open source hardware wearable Arduino Leonardo-like development board.
Faetures:
ATMEGA32U4 Arduino Leonardo compatible
Works with Arduino IDE
Micro USB cable connector (unlike most of the other Olimex boards which use mini USB)
User button
Reset button
Micro SD card ..
19.13€
Ex Tax:15.24€
Brand: Olimex
Model: OL-NANO-BAT
Description: Open source hardware power supply for wearable Arduino Leonardo like development board
Features:
Stacks on top of OLIMEXINO-NANO
LiPo battery charger
LiPo connector
Lithium 3V battery
Switch for selecting battery power (switch off battery if necessary)..
9.01€
Ex Tax:7.18€
Brand: Olimex
Model: OL-NANO-GSM
Description: GSM/GPRS/Bluetooth 3.0 shield for OLIMEXINO-NANO with SIM800H quad band module
OLIMEXINO-NANO-GSM is a GSM/GPRS/Bluetooth 3.0 shield for OLIMEXINO-NANO with the SIM800H quad band module. It allows OLIMEXINO-NANO to place and take GSM calls, to send and receive SMS and to send and rec..
33.30€
Ex Tax:26.53€
Brand: Olimex
Model: OL-STM32
Description: ARDUINO / MAPLE like board with STM32F103RBT6
FEATURES:
STM32F103RBT6 microcontroller
DCDC power supply allow power input voltage from 9 to 30V DC thus making possible to take virtually any power supply adapter on the market, also enable application which are in industrial po..
30.26€
Ex Tax:24.11€
Brand: Olimex
Model: OL-BA-1400
This is a rechargeable Li-Po high discharge current battery with JST connector ready to plug to:
OLIMEXINO-328, OLIMEXINO-STM32, PIC32-PINGUINO, PIC32-PINGUINO-OTG, DUINOMITE and DUINOMITE-MEGA
The battery has overcharge and short circuit protection.
Features:
Charge voltage 4.2V, nom..
13.26€
Ex Tax:10.56€
Brand: Olimex
Model: OL-BA-250
Description: This is a rechargeable Li-Po high discharge current battery with JST connector. The battery has overcharge and short circuit protection.
Features:
Charge voltage 4.2V, nominal voltage 3.7V, cut-off voltage 3.0V
Recommended charge current 50mA
Max charge current 125mA
Re..
9.01€
Ex Tax:7.18€
Brand: Olimex
Model: OL-BA-800
↵
Description: This is a rechargeable Li-Po high discharge current battery with JST connector. The battery has overcharge and short circuit protection.
Features:
Charge voltage 4.2V, nominal voltage 3.7V, cut-off voltage 3.0V
Recommended charge current 160mA
Max charge cu..
10.02€
Ex Tax:7.98€
Brand: Olimex
Model: OL-PROTOS
Description: This is a prototype shield for MAPLE, PINGUINO, ARDUINO like boards, it has a sea of 0.1" pads with easy access to +vcc and gnd around each pad.
Features:
Stackable headers
Two buttons
Two leds
Prototype PTH area
SMD IC area
Filter capacitors
4 mount holes make boar..
10.02€
Ex Tax:7.98€
Brand: Olimex
Model: SHIELD-LCD16x2
Description: Arduino compatible Serial / I2C LCD shield with LCD16x2 with backlight and 4 buttons, Arduino library and demo examples. Accepts commands by UART or I2C.
Documents: Here..
20.14€
Ex Tax:16.05€
Brand: Olimex
Model: OL-SOMA20-n8GB
Descipriotn: A20-SOM is System on Chip module, which contains A20 Dual Core Cortex-A7 processor, Power managment Unit AXP209, 1GB DDR3 memory and 8GB NAND Flash. All A20 signals are available on 6 connectors x 40 pin with 0.05" step. A20-SOM have UART console connector and SD-card.
Reference desi..
62.75€
Ex Tax:50.00€