Brand: Sparkfun
Model: TOL12942
Description: The Bus Pirate, created by Ian Lesnet and featured on Hack a Day, is a troubleshooting tool that communicates between a PC and any embedded device over most standard serial protocols, which include I2C, SPI, and asynchronous serial - all at voltages from 0-5.5VDC. This product eliminate..
39.90€
Ex Tax:32.18€
Brand: Sparkfun
Model: DEV13262
Description: The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll the ECU for information including coolant temperature, throttle position, vehicle speed, and engine rpms. You can also store this data or ou..
32.90€
Ex Tax:26.53€
Brand: Sparkfun
Model: RTL10769
Description: This is the same product as the OBD-II UART. The difference is this version comes with the appropriate cable in fancy clamshell packaging and is meant for our distributors that need it. Regular customers are welcome to order, but we want to limit the amount of extra packaging finding it..
65.50€
Ex Tax:52.82€
Brand: Sparkfun
Model: PRT12618
Description: This is a simple coin cell battery holder that can enclose two CR2032 batteries inside itself, and safely kept closed via two phillips head screws. Each battery holder is equipped with an On/Off slide switch and two 6" power wires (one positive and one negative) on the back...
2.95€
Ex Tax:2.38€
Brand: Sparkfun
Model: PRT00783
Description: Basic 20mm coin cell holder. Posts can be inserted into 0.1" perf board! Holds the common CR2032 type batteries.
Documents: Datasheet..
1.95€
Ex Tax:1.57€
Brand: Sparkfun
Model: DEV11649
Description: The Danger Shield mounts on top of your Arduino or Arduino Pro and equips it with a variety of fun and useful inputs and outputs. The Danger Shield has so much potential; we can't wait to see what you're able to do with it! The shield's features include:
Three linear slide potenti..
33.25€
Ex Tax:26.81€
Brand: Sparkfun
Model: PRT07942
Description: Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are! Number of pins include: 8, 14, 16, 18, 28, and 40.
This is a 300mil wide 28-pin socket...
1.00€
Ex Tax:0.81€
Brand: Sparkfun
Model: PRT07944
Description: Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are!
This is a 600mil wide 40-pin socket...
1.60€
Ex Tax:1.29€
Brand: Sparkfun
Model: COM08034
Description: DIP switch with 8 individual switch positions. The pins have .1" spacing - fits great into a breadboard! Works great as general control switches.
Documents: Datasheet..
1.95€
Ex Tax:1.57€
Brand: Sparkfun
Model: LCD10150
Description: E-paper displays are rad. They can maintain an image even after power has been removed. They also have very high contrast and low power consumption. This particular display is a 10x2 character display, allowing you to display up to 20 characters.
Check the datasheet below for informa..
28.20€
Ex Tax:22.74€
Brand: Sparkfun
Model: BOB10304
Description: E-paper displays are rad. But those 26-pin SMD connectors can be a real pain to solder, so we put together a breakout board to help you integrate this very cool technology into your next project. This board breaks out all of the major pins from the e-paper ribbon connector to a 0.1" pit..
17.20€
Ex Tax:13.87€
Brand: Sparkfun
Model: ROB12779
Description: The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper mo..
17.10€
Ex Tax:13.79€