Brand: Sparkfun
Model: WRL12823
Description: This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Me..
14.90€
Ex Tax:12.02€
Brand: Sparkfun
Model: SEN12787
Description: This is the SparkFun RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and Gesture Sensor you will be able to control a computer, microcontrolle..
19.80€
Ex Tax:15.97€
Brand: Sparkfun
Model: SEN12829
Description: If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements, the ISL29125 breakout board may be just what you need. The ISL29125 breakout board makes it very easy to sense and record the light intensit..
11.90€
Ex Tax:9.60€
Brand: Sparkfun
Model: BOB11722
Description: This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to standard, breadboard friendly, 0.1" headers. Turn it over and it has a footprint for the R/G version! Simply solder an encoder down to the board..
3.95€
Ex Tax:3.19€
Brand: Sparkfun
Model: SF-13672
Description: If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Dev Breakout is a great landing spot. The SparkFun SAMD21 Dev Breakout is an Arduino-sized breakout for the Atmel ATSAMD21G18, a 32-bit ARM Cortex-M0+ processor with 256KB flash, 32..
29.90€
Ex Tax:24.11€
Brand: Sparkfun
Model: KIT13094
Description: The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed with a huge amount of tech goodies into a tiny package while still providing the same robust strength of your go-to single board computer. Powered by t..
74.90€
Ex Tax:60.40€
Brand: Sparkfun
Model: DEV15096
Description: This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340C and takes advantage of the handy USB-C connector. With USB-C you can get up to three times the power delivery over the previous USB generation at 1.5A and and also solves the universally frus..
12.90€
Ex Tax:10.40€
Brand: Sparkfun
Model: DEV14050
Description: The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers. The Serial Basic uses the CH340G IC to quickly and eas..
12.90€
Ex Tax:10.40€
Brand: Sparkfun
Model: DEV15316
Description: The SparkFun Servo pHAT for Raspberry Pi allows your Raspberry Pi to control up to 16 servo motors in a straightforward and uncomplicated manner via an I2C connection. Thanks to its I2C capabilities, this PWM HAT saves the Raspberry Pi's GPIO pins, allowing you to use them for other pur..
13.90€
Ex Tax:11.21€
Brand: Sparkfun
Model: WIG13872
Description: The SparkFun Continuous Rotation (CR) Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external switch or logic signal changes state, the CR Servo Trigger is able to tell an attached servo motor to move from position A to position B. ..
20.90€
Ex Tax:16.85€
Brand: Sparkfun
Model: WRL13632
Description: The SparkFun Simblee BLE Breakout board is a programmable board that allows you to add mobile app functionality via Bluetooth Low Energy (BLE, or Bluetooth 4.0) to your embedded projects. Unlike other BLE solutions, the Simblee requires no specialized app development skills to realize t..
28.90€
Ex Tax:23.31€
Brand: Sparkfun
Model: PRT13268
Description: Sometimes it’s nice to have a protoboard that’s super long and skinny, super small, or just a bunch of holes. The SparkFun Snappable Protoboard is a large PCB crisscrossed with v-scored lines so that you can choose just how long and wide you need your custom protoboard to be. The Snapab..
10.90€
Ex Tax:8.79€