Brand: Sparkfun
Model: DEV15583
Description: Teensy 4.0 features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. Teensy 4.0 is the same size and shape as Teensy 3.2, and retains compatibility with most of the pin functions on Teensy 3.2.
When running at 600 MHz, Teen..
36.90€
Ex Tax:29.76€
Brand: Sparkfun
Model: DEV16997
Description: Teensy 4.0 features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. Teensy 4.0 is the same size and shape as Teensy 3.2, and retains compatibility with most of the pin functions on Teensy 3.2.
When running at 600 MHz, Teen..
41.90€
Ex Tax:33.79€
Brand: Sparkfun
Model: DEV16771
Description: The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the ..
49.90€
Ex Tax:40.24€
New
Brand: Sparkfun
Model: DEV20359
The Teensy 4.1 is the newest iteration of the astoundingly popular
development platform that features an ARM Cortex-M7 processor at 600MHz,
with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0,
and two new locations to optionally add more memory. The Teensy 4.1 is
the same ..
47.90€
Ex Tax:38.63€
Brand: Sparkfun
Model: DEV13305
Description: The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 brings a 32 bit ARM Cortex microprocessor into the mix so you can do some serious number crunching.
The Teensy 3.1 comes pre-flashed with a bootloader so you can pr..
20.90€
Ex Tax:16.85€
Brand: Sparkfun
Model: DEV13995
Description: The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. This shield features 10DoF (Degrees of Freedom) motion sensors, a 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, and an 8MB flash memory. This lit..
14.90€
Ex Tax:12.02€
Brand: Sparkfun
Model: WRL13002
Description: This ANT500 is a telescopic antenna designed for operation from 75 MHz to 1 GHz with a total length that is configurable from 20 cm to 88 cm long. Each ANT500 is constructed of stainless steel and features an SMA male connector, rotating shaft, and adjustable elbow.
The ANT500 is a 5..
44.90€
Ex Tax:36.21€
Brand: Sparkfun
Model: SEN11050
Description: This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a..
15.20€
Ex Tax:12.26€
Brand: Sparkfun
Model: COM10560
Description: This is a 34' roll of thermal printing paper for use with our thermal printer. This roll is smaller than you find at most office supply stores so it fits directly into the printer without having to remove any paper from the roll. Simply place it into the printer with the glossy side fac..
3.00€
Ex Tax:2.42€
Brand: Sparkfun
Model: COM15350
Description: If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.25W, 8Ohm speaker is only 40mm in diameter and just over 4mm thick, the same kind you might find in one of those "talking greeting cards".
Documents:
Datasheet
..
1.95€
Ex Tax:1.57€
Brand: Sparkfun
Model: PGM11801
Description: The ATtiny45 and 85 are a couple of really cool little MCUs but did you know you can program them in Arduino? That’s right, now you can shrink your Arduino projects down to “tiny size” by moving your code straight over to these small but capable ICs. The standard method for programming ..
23.90€
Ex Tax:19.27€
Brand: Sparkfun
Model: SEN10988
Description: The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn't require any external calibration to provide typical accuracies of..
2.30€
Ex Tax:1.85€