Brand: Sparkfun
Model: PRT14059
Description: The SmartiPi Touch is a case and stand for the official Raspberry Pi 7" Touchscreen LCD. The display securely fits into the case with four screws, while a Raspberry Pi 2, 3, B+ or A+ is enclosed in the compartment on the back with a simple door. A ribbon cable that comes with the displa..
34.41€
Ex Tax:27.42€
Brand: Sparkfun
Model: PRT12702
Description: This is the Mini Solder-able Breadboard. A bare PCB that is the exact size as our mini modular breadboards with the same connections to pins and power rails. This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering..
5.26€
Ex Tax:4.19€
Brand: Sparkfun
Model: ROB11015
Description: Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers.This smaller solenoid is designed to work directly with 5V which makes it a great match for embedded projects. It has a throw of about 6mm and 2 M2 mounting holes on the body.
Th..
7.50€
Ex Tax:5.98€
Brand: Sparkfun
Model: BOB13601
Description: Are you low on I/O? No problem! The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface – that means with just two wires, your microcontroller can interface with 16 fully configurable digital input/output pins. But the SX1509 can do so much more than just simple digital ..
7.59€
Ex Tax:6.05€
Brand: Sparkfun
Model: SEN11084
Description: Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it's easy to interface ..
21.15€
Ex Tax:16.85€
Brand: Sparkfun
Model: WRL12849
Description: The RN-52 Bluetooth from Roving Networks is an audio module that makes it simple for you to create a hands free audio system for your car or remote control your media center. With this breakout board we’ve made it easy for you to drop it into any project you could use it for. All pertin..
50.50€
Ex Tax:40.24€
Brand: Sparkfun
Model: PRT13777
Description: The SparkFun Battery Babysitter is an all-in-one single-cell Lithium Polymer (LiPo) battery manager. It’s half battery charger, half battery monitor, and all you’ll ever need to keep your battery-powered project running safely and extensively.
The Battery Babysitter features a pair o..
22.16€
Ex Tax:17.66€
Brand: Sparkfun
Model: WRL13019
Description: This is the SparkFun BLE Mate 2, an efficient and reliable Bluetooth 4.0 development board. The BLE Mate 2 closely resembles a breakout board, in that nearly every pin on the on-board BC118 module is made available to access. This board is actually a close cousin to our Gold and Silver ..
35.32€
Ex Tax:28.15€
Brand: Sparkfun
Model: CEL13120
Description: The MG2639 SparkFun Cellular Shield is a perfect addition to any Arduino project that requires connectivity when there’s no WiFi or Ethernet access nearby. The ZTE MG2639 module, which this shield is built around, supports SMS, TCP, UDP, and can even be used to make or receive phone cal..
80.92€
Ex Tax:64.48€
Brand: Sparkfun
Model: SEN14544
The low current version of the SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for low to moderate AC and DC current sensing applications. The ACS723 sensor uses a Hall effect sensor to output a voltage relative to the current flowing through the IP+ and IP- pins o..
19.13€
Ex Tax:15.24€
Brand: Sparkfun
Model: COM12781
Description: The SparkFun EL Sequencer is a board that contains an Arduino-compatible microcontroller, and circuitry for controlling up to eight strands of electroluminescent wire. EL wire is flexible plastic cord that glows brightly when high-voltage AC is applied to it. It’s available in numerous ..
43.42€
Ex Tax:34.60€
Brand: Sparkfun
Model: DEV14215
Description: The SparkFun gamer:bit is a fun-filled “carrier” board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional game system. Designed in a similar form factor to the classic Nintendo NES controller, the gamer:bit is equipped with a four-direction “D..
16.09€
Ex Tax:12.82€