Brand: Sparkfun
Model: COM10103
Description: The Serial Alphanumeric Display Driver allows you to communicate with alphanumeric displays over a simple SPI interface. Based on the A6282 IC, these boards work well with all of our alphanumeric displays and we have even provided a library listed below.
You can daisy-chain as many d..
17.31€
Ex Tax:13.79€
Brand: Sparkfun
Model: PRT11157
Description: DB9 connectors are a great way to make a tight connection on your project or to plug into existing serial lines. Now you can make your own DB9 cables the easy way with these crimp-on ribbon cable connectors. These work great with our 10-wire ribbon cable, you just need to peel back the ..
2.99€
Ex Tax:2.38€
Brand: Sparkfun
Model: PRT11156
Description: DB9 connectors are a great way to make a tight connection on your project or to plug into existing serial lines. Now you can make your own DB9 cables the easy way with these crimp-on ribbon cable connectors. These work great with our 10-wire ribbon cable, you just need to peel back the ..
2.99€
Ex Tax:2.38€
Brand: Sparkfun
Model: LCD09568
Description: This is the latest evolution of our serial LCD. Included on a single board is a 20x4 LCD and an embedded circuit based around a PIC 16F88. The on-board PIC takes a TTL serial input and prints the characters it receives onto the LCD. The installed firmware also allows for a number of spe..
30.57€
Ex Tax:24.35€
Brand: Sparkfun
Model: LCD00258
Description: The serial enabled LCD backpack allows you to control a parallel based LCD over a single-wire serial interface. The SerLCD backpack takes care of all the HD44780 commands allowing seamless integration with any micro that can communicate over a wide range of TTL serial baud rates. The Se..
18.22€
Ex Tax:14.52€
Brand: Sparkfun
Model: LCD10097
Description: This easy to assemble kit gives you all the parts necessary to assemble a serial 16x2 character LCD display. By sending commands over a serial port from your computer or microcontroller, you can display basic text on the included LCD display.
The main controller IC comes preprogramme..
30.57€
Ex Tax:24.35€
Brand: Sparkfun
Model: SEN09332
Description: Breakout board for the low power, single axis ADXL193 accelerometer. The ADXL193 is a high-g sensor with a full scale range of..
34.31€
Ex Tax:27.34€
Brand: Sparkfun
Model: COM10976
Description: These motorized sliders are very cool. Each is essentially a standard slide pot which is belt-driven by a small motor. The slide contains two separate 10k linear taper potentiometers so that you can use one as servo-feedback in order to read the position of the slider and use the other ..
22.16€
Ex Tax:17.66€
Brand: Sparkfun
Model: ROB09347
Description: Here, for all your mechatronic needs, is a simple, high quality continuous full-rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min.
A standard 3-pin power and control cable is attached and all hardware listed below i..
19.13€
Ex Tax:15.24€
Brand: Sparkfun
Model: ROB10551
Description: These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern.
Features:
Stride Angle (degrees) : 7.5
2-Phase
Rated Voltage : 12V
Rated Current : 400mA
3mm Diameter Drive Shaft
4-Wire Cable Attached
In-traction..
10.32€
Ex Tax:8.23€
Brand: Sparkfun
Model: PRT14059
Description: The SmartiPi Touch is a case and stand for the official Raspberry Pi 7" Touchscreen LCD. The display securely fits into the case with four screws, while a Raspberry Pi 2, 3, B+ or A+ is enclosed in the compartment on the back with a simple door. A ribbon cable that comes with the displa..
34.41€
Ex Tax:27.42€
Brand: Sparkfun
Model: PRT12702
Description: This is the Mini Solder-able Breadboard. A bare PCB that is the exact size as our mini modular breadboards with the same connections to pins and power rails. This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering..
5.26€
Ex Tax:4.19€