Brand: Sparkfun
Model: CAB13028
Description: This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi 4, 3, 2, and B+ so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity. Color may vary...
4.30€
Ex Tax:3.43€
Brand: Sparkfun
Model: PRT17907
The Raspberry Pi Pico Headers Kit provides you with the exact set of solderable headers to get your Raspberry Pi Pico connected to a breadboard or other circuit. This set includes two 20-pin headers, and one 3-pin header; the pins are spaced by 0.1".
Note: Soldering is required for functionality ..
1.95€
Ex Tax:1.55€
Brand: Sparkfun
Model: BOB12708
Description: This is the Real Time Clock (RTC) Module, this little breakout that uses the DS1307 to keep track of the current year, month, day as well as the current time. The module comes fully assembled and pre-programmed with the current time (MST) and includes a small CR1225 Lithium coin cell ba..
16.09€
Ex Tax:12.82€
Brand: Sparkfun
Model: COM11041
Description: Based on the Controllable Power Outlet Tutorial, this is the bare PCB that allow you to switch high voltages with a simple 0 to 5V GPIO on any microcontroller.
Note: This is only the bare PCB. You must buy the through-hole components and solder them to the PCB. The necessary through-..
4.25€
Ex Tax:3.39€
Brand: Sparkfun
Model: COM11507
Description: 1/4th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limiters and are great for general use.
Note: Although these come in bags marked with a quantity of 25, they don't always contain 25. So we'd ra..
1.97€
Ex Tax:1.57€
Brand: Sparkfun
Model: COM10969
Description: Resistors are a good thing, in fact, they're actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you're gonna have the resistor you need when you need it is to stock up, and keep them organized. ..
13.10€
Ex Tax:10.44€
Brand: Sparkfun
Model: DEV13216
Description: This is the RFduino CR2032 Coin Battery Shield, a small add-on board for the RFduino DIP module that supplies 2-3V to your whole project. This shield can easily attach anywhere on your RFduino stack and will still be able to provide reliable power throughout your boards.
The CR2032 C..
23.18€
Ex Tax:18.47€
Brand: Sparkfun
Model: SEN09417
Description: This is a simple, thumbnail-size RFID tag. These tags are great for sensing presence, identification, etc., and they're small, so they can be easily sewn into clothing or inserted into enclosures. Each tag comes with a unique 32-bit ID code and is not reprogrammable. The carrier frequen..
5.47€
Ex Tax:4.35€
Brand: Sparkfun
Model: DEV10406
Description: This board is an evaluation platform for the SM130 RFID module. It includes an XBee header, PCB trace antenna, and has the layout to be used as a shield for an Arduino. There is a small prototyping area as well. This board can also be used as an antenna to the SM130 RFID module. Be sure..
17.10€
Ex Tax:13.63€
Brand: Sparkfun
Model: SEN09416
Description: This is a glass, cylindrical RFID tag; it’s very similar to those implanted into pets for identification purposes. But really guys, it’s not for use inside your body. Please don’t implant this thing into yourselves. Each tag comes with a unique 32-bit ID code and is not reprogrammable. ..
9.01€
Ex Tax:7.18€
Brand: Sparkfun
Model: SEN10126
The SMB130 is a 28 pin DIP module that includes all necessary components for a 13.56 MHz RFID Mifare, aside from a PCB antenna.
The module communicates over UART or I2C with simple protocols. It also has 2 general purpose inputs and 2 general purpose outputs for switches, relays, etc.
Note: We..
38.36€
Ex Tax:30.56€
Brand: Sparkfun
Model: SEN08423
Description: This is a simple breakout board for our RFID readers. This board will bring the 2mm spaced pins out to two 0.1" spaced headers. You can solder the reader directly to the breakout board or use our 2mm sockets.
Breakout board fits within and under the ID-12 / ID-2. The board also works..
1.32€
Ex Tax:1.05€