Brand: Sparkfun
Model: DEV10864
Description: Ethernet connectivity is a great way to get your Arduino talking to other systems all over the world (or at least the network). But sometimes running an Ethernet cable is hard enough, why should you have to run a power cable too? That's where PoE comes into play: Power over Ethernet. Th..
42.81€
Ex Tax:34.11€
Brand: Sparkfun
Model: TOL10950
Description: Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be made by simply heating the plastic beads in hot water until they turn clear and then kneading them together and shaping by hand. When it cools it become..
10,119.96€
Ex Tax:8,063.71€
Brand: Sparkfun
Model: DEV10618
Description: This shield allows you to use a computer power supply (or other power source) to use your Arduino to switch high current. With RFP30N06LE MOSFETS, you can easily control a lot of current directly from your Arduino.
The board provides 6 PWM outputs via screw terminals. Check the data..
24.49€
Ex Tax:19.52€
Brand: Sparkfun
Model: DEV12587
Description: Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connec..
24.19€
Ex Tax:19.27€
Brand: Sparkfun
Model: DEV12640
Description: Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connec..
24.19€
Ex Tax:19.27€
Brand: Sparkfun
Model: DEV09729
Description: The ScrewShield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset but..
16.09€
Ex Tax:12.82€
Brand: Sparkfun
Model: DEV10615
Description: This is the Arduino shield version of our TLC5940 Breakout. The PWM Shield will allow you to generate up to 16 PWM signals from your Arduino by utilizing the power of the TLC5940 IC. All 16 PWM channels are broken out to standard 0.1" headers, which run alongside convenient voltage and ..
22.47€
Ex Tax:17.90€
Brand: Sparkfun
Model: CEL00675
Description: This is a fantastic find for SFE. A small, high-quality, quad-band, standard SMA terminated, cellular antenna.
Specifications:
GSM/850E : 824 to 894MHz
GSM : 880 to 960MHz
DCS : 1710 to 1880MHz
PCS : 1850 to 1990MHz
Documents: GSM Antenna 850-1900MHz..
8.05€
Ex Tax:6.41€
Brand: Sparkfun
Model: CEL00290
Description: A Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellular module to the outside world. Operates on four frequencies. Comes with a 3M adhesive backing for mounting. Standard male SMA terminated.
Key Specifications:
Quad-band: 850/900..
14.07€
Ex Tax:11.21€
Brand: Sparkfun
Model: PRT11490
Description: This 2x13 shrouded header has the same number and spacing of pins as the Raspberry Pi (NOT FOR Pi 2 or Pi 3 or Pi 4) so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 26 0.1"-spaced pins and is keyed for polarity...
1.32€
Ex Tax:1.05€
Brand: Sparkfun
Model: CAB13028
Description: This 2x20 flat ribbon-cable fits the GPIO headers on the Raspberry Pi 4, 3, 2, and B+ so you can easily connect to the low-level peripherals and get hacking! This cable has 0.1"-spaced connectors and is keyed for polarity. Color may vary...
4.30€
Ex Tax:3.43€
Brand: Sparkfun
Model: PRT17907
The Raspberry Pi Pico Headers Kit provides you with the exact set of solderable headers to get your Raspberry Pi Pico connected to a breadboard or other circuit. This set includes two 20-pin headers, and one 3-pin header; the pins are spaced by 0.1".
Note: Soldering is required for functionality ..
1.95€
Ex Tax:1.55€