Brand: Sparkfun
Model: DEV12049
Description: This is the LilyPad Arduino USB board, controlled by an ATmega32U4 with the Arduino bootloader. It has a built in power supply socket and an on/off switch with the only extra piece of hardware you need to program the LilyPad USB is a micro-USB cable, since the new IC has built-in USB su..
33.30€
Ex Tax:26.53€
Brand: Sparkfun
Model: KIT12073
Description: The LilyPad Design Kit (LDK) is a great way to get started with e-textiles. The LDK includes everything you need to complete 6 simple experiments that will teach you how to sew basic circuits, light LEDs, create interactive designs, and more. You don’t need any previous sewing or electr..
80.87€
Ex Tax:64.44€
Brand: Sparkfun
Model: DEV08777
Description: Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the loc..
6.98€
Ex Tax:5.56€
Brand: Sparkfun
Model: ROB09454
This version of the QRE1113 breakout board features a digital output, using a capacitor discharge circuit to measure the amount of reflection. This tiny board is perfect for line sensing when only digital I/O is available, and can be used in both 3.3V and 5V systems.
The board's QRE1113 IR reflec..
6.07€
Ex Tax:4.84€
Brand: Sparkfun
Model: PRT10217
Description: If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells at a rate of 500mA per hour. It is designed to charge single-cell Li-Ion or Li-Polym..
11.03€
Ex Tax:8.79€
Brand: Sparkfun
Model: DEV10711
Description: Is there anything an Arduino can't do? Well, for one, most of them can't be powered directly from a 3.7V LiPo battery; much less charge and monitor that battery. The LiPower Shield takes care of this by combining the functionality of two of our favorite battery power boards: the Power C..
10,119.96€
Ex Tax:8,063.71€
Brand: Sparkfun
Model: SEN10245
Description: This load sensor is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year’s resolutions, and then forget about a month later). This sensor can measure up to about 110 pounds. Check the video below for a simple explanation on how these wor..
13.06€
Ex Tax:10.40€
Brand: Sparkfun
Model: SEN10888
Description: The LSM303DLMTR is a triple axis accelerometer combined with a triple axis magnetic sensor. This arrangement allows for the LSM303 to perform 6D orientation detection. This breakout board uses the LSM303DLMTR to give you all the data you need to feed into a microcontroller and calculate..
33.65€
Ex Tax:26.81€
Brand: Sparkfun
Model: SEN12636
Description: This is the LSM9DS0, a versatile motion-sensing system-in-a-chip that houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer. That's right, 9 degrees of freedom (9dof) from a single IC!
Each sensor in the LSM9DS0 supports a wide range of, well, ranges: the accelerom..
33.30€
Ex Tax:26.53€
Brand: Sparkfun
Model: DEV11007
Description: It's powerful, it's portable, it's Pro! We're continuing our Pro series of Arduino-compatible micro-controllers with the addition of the Mega Pro. This is a 5V microcontroller running a version of the stk500v2 bootloader at 16MHz. Just like the other Pro-series boards this board is buil..
54.15€
Ex Tax:43.15€
Brand: Sparkfun
Model: COM11967
Dot illuminated push-button
LED voltage: 5-12V
16mm diameter
3A/250VAC
1NO 1NC / 2NO 2NC
Front shape: High round
Crust material: Stainless steel / Brass: Nickel Plated
Dot illuminated
IP Degree: IP40/IP67..
10.02€
Ex Tax:7.98€
Brand: Sparkfun
Model: PRT14299
Description: This is a unique two-cell AA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector. The connector mates the JST socket on the micro:bit perfectly, allowing you to easily make your project battery powered.
Note: Plea..
1.97€
Ex Tax:1.57€