Brand: Sparkfun
Model: COM11759
Description: Have you ever needed a cheap way to activate something from across the room? Infrared remotes are still the cheapest way to wirelessly control a device. We have designed the remote to be small, very simple, and low-cost. For the majority of the projects we build, we don’t need 34 button..
5.90€
Ex Tax:4.76€
Brand: Sparkfun
Model: SEN08733
Description: Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save you 15-20 minutes over making your own wiring harness.
Length: 13 cm..
1.95€
Ex Tax:1.57€
Brand: Sparkfun
Model: WRL00662
Description: This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any standard RP-SMA 2.4GHz antenna to the DPAC 802.11 modules.
Dimensions: 4" Length (10cm)..
5.90€
Ex Tax:4.76€
Brand: Sparkfun
Model: WRL09145
Description: This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors...
4.95€
Ex Tax:3.99€
Brand: Sparkfun
Model: SEN08554
This is a very small infrared receiver based on the TSOP85 receiver from Vishay. This receiver has all the filtering and 38kHz demodulation built into the unit. Simply point a IR remote at the receiver, hit a button, and you'll see a stream of 1s and 0s out of the data pin.
Documents:
Datas..
13.00€
Ex Tax:10.48€
Brand: Sparkfun
Model: SEN10266
Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes.
The TSOP382 is a miniaturized receiver for infrared remote control systems. A PIN di..
2.95€
Ex Tax:2.38€
Brand: Sparkfun
Model: DEV10549
Description: The JPEG Trigger interfaces with the LinkSprite JPEG Color Camera to simplify picture taking. To take a picture, all you have to do is pull one of three digital pins to ground (D2, 3 or 4), or pull one of three analog pins to 5V (A0, 1 or 2). The on-board Arduino compatible ATmega328 is..
30.20€
Ex Tax:24.35€
Brand: Sparkfun
Model: PRT12796
Description: These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header. Combine these with our male to male jumpers to create a male to female jumper. Multiple jumpers can be connected next to one another on a ..
2.45€
Ex Tax:1.98€
Brand: Sparkfun
Model: PRT12794
Description: These are 6" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of 20 jumpers (colors shown). Each group of jumpers are connected to ea..
2.45€
Ex Tax:1.98€
Brand: Sparkfun
Model: PRT12795
Description: These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a male to female jumper. Multiple jumpers can be connected next to one another..
2.45€
Ex Tax:1.98€
Brand: Sparkfun
Model: PRT09388
Description: This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty jumpers (colors shown).
We use thes..
43.90€
Ex Tax:35.40€
Brand: Sparkfun
Model: COM08674
Every laser needs a holder! This custom designed plastic mount fits the SparkFun flat laser modules. Insert the module into the mount and the laser will snap into place. Two screws are required and hold this mount strongly in place. Laser mount screws directly into chest plate of RFL robot for easy ..
7.20€
Ex Tax:5.81€