Brand: DFRobot
Model: FIT0004
Pan and Tilt assembly for horizontal surface mount. Made using two DFRobot servo brackets. Perfect for your small remote piloted robot! Includes hardware.
It supports
Hitec 422
Hitec 311
...
.....
15.28€
Ex Tax:12.18€
Brand: DFRobot
Model: DFR0105
Introduction: Most project of Arduino may need more than two voltage supply. When feed with from 4.5-35V, this power shield able to provide a voltage range from 1.25-12V with 3A peak current. Ideal for servo control and other non-standard components. With this shield, your Arduino now have one power..
22.47€
Ex Tax:17.90€
Brand: DFRobot
Model: DFR0131
Introduction
Combines the power of screw shield and prototyping shield. This Proto Screw shield offers a better way to do prototyping.
The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can..
17.10€
Ex Tax:13.63€
Brand: DFRobot
Model: DFR0017
Introduction
Introduction: The DFRobot Relay Module blocks the number of electronic modules. It can be used in interactive projects. It can also be used to control the lighting, electrical and other equipments. The modular design makes it easy to expand with the Arduino board (not included). The ..
8.00€
Ex Tax:6.37€
Brand: DFRobot
Model: FIT0058
Introduction
The mounting plate for RP5 tracked chassis is a high strength, non-friable, non-conductive, and designed to fit a variety of sensors, controllers, power switch, charging socket mounting holes, including GP2D12 bracket, infrared switch bracket, Arduino, Romeo, MEGA and other control..
10.12€
Ex Tax:8.06€
Brand: DFRobot
Model: DFR0060
Introduction
The Arduino-Compatible Screw Shield is a terminal expansion board that can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use this shield to save yourself from the bad port connection. Feel secu..
11.03€
Ex Tax:8.79€
Brand: DFRobot
Model: FIT0129
Description: 8 Pin keyboard scan, ready to go and super slim...
10.02€
Ex Tax:7.98€
Brand: DFRobot
Model: FIT0367
INTRODUCTION: This tiny little orange heatsink is a perfect solution for cooling off small surface-mount components such as stepper driver or CPUs on Raspberry Pi or mini PC. It is made of pure copper to increase heat dissipation and transfer for your machine running cooler in summer.
APPLICATION..
1.77€
Ex Tax:1.41€
Brand: DFRobot
Model: FIT0033
Introduction
This is a 300mm servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronic..
3.04€
Ex Tax:2.42€
Brand: DFRobot
Model: FIT0005
Introduction
This mounting bracket is designed for Sharp GP2D12/2D15.
The color of bracket may vary and not the same as shown in the picture.
Specification
Size:45x20x15mm
Mounting hole distance:14mm
Weight:5g..
8.10€
Ex Tax:6.45€
Brand: DFRobot
Model: TOY0054
Introduction: The Si7021 I2C Humidity and Temperature Sensor is a monolithic CMOS IC integrating humidity and temperature sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C Interface. The patented use of industry-standard, low-K polymeric dielectrics for..
19.13€
Ex Tax:15.24€
Brand: DFRobot
Model: DFR0091
Introduction
This LCD module uses a 128x64 liquid crystal display that support Chinese character , English characters and even graphics. It is suitable for interactive work with Arduino.
It features a backlit control, pallerlel or serial control, contrast adjust. It can be connect to our inte..
30.57€
Ex Tax:24.35€