Brand: DFRobot
Model: DFR0063
Introduction: This is another great LCD display compatible with Gadgeteer modules from DFRobot. With limited pin resources, your project will quicly run out of resources using normal LCDs. With this I2C interface LCD module, you only need 2 lines (I2C)to display the information.If you already have I..
14.07€
Ex Tax:11.21€
Brand: DFRobot
Model: DFR0074
Introduction
This interface shield supports multi-interfaces, SPI interface (directly connected Shiftout module, SPI LCD display module, SPI LED display module), IIC Interface (direct connects IIC lCD display module, IIC transfer IO module), Micro SD card interface (Micro SD card can be directly ..
17.31€
Ex Tax:13.79€
Brand: DFRobot
Model: DFR0165
INTRODUCTION: Say goodbye to messy cables and clueless pluging/unpluging! This Sensor Shield is a powerful expansion shield for Arduino Mega Due. It is large enough to carry up to 3 Xbee slots, 1 microSD slot and shield headers for most Arduino shields on the market. Besides, we also added a prototy..
27.23€
Ex Tax:21.69€
Brand: DFRobot
Model: DFR0107
ntroduction
This IR kit provides a remote control capability to your project.
Documents
Arduino Library
Wiki Doc
Shipping List
IR Remote Controller (1 unit)
IR Receiver Module (1 unit) (SKU: DFR0094)
Digital Cable (1 unit)..
12.25€
Ex Tax:9.76€
Brand: DFRobot
Model: DFR0374
Dexcription: The Arduino LCD Keypad Shield V2 includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD and Analog Pin 0 is used to read the work status of five pushbuttons.
This product ensures consumer's convience especially when c..
17.10€
Ex Tax:13.63€
Brand: DFRobot
Model: DFR0287
Description: This framed LCD12864 Shield with LED backlight is compatible with most of Arduino controllers and supports English/Chinese/Picture display. With 5 analog extension pins and 8 digital pins, the LCD12864 Shield also integrates a 5-key joystick for controlling additional functions, making ..
28.24€
Ex Tax:22.50€
Brand: DFRobot
Model: SEN0017
Introduction
This sensor is for line tracking purpose. It detects white and black color, and it outputs via TTL signal.
You can even combine several sensors to meet your specific requirements.
Specification
Power supply: +5V
Operating current: <10mA
Operating temperature range:..
5.10€
Ex Tax:4.06€
Brand: DFRobot
Model: DFR0023
Introduction: The DFRobot LM35 Linear Temperature Sensor is based on the semiconductor LM35 temperature sensor. The DFRobot LM35 Linear Temperature Sensor can be used to detect ambient air temperature. The LM35 chip is produced by National Semiconductor Corporation and offers a functional range betw..
7.08€
Ex Tax:5.65€
Brand: DFRobot
Model: DFR0035
Introduction
The MEGA IO Expansion Shield can be used for a variety of interactive works, it is often used in a number of sensors or circuit. For those who are familiar with the electronic circuits or universal board with bread board module, it helps in building a simple circuit effortlessly, but..
16.19€
Ex Tax:12.90€
Brand: DFRobot
Model: DFR0016
Introduction
This is a design for an open-source prototyping shield for Arduino Mega. It has tons of cool features, to make prototyping on your Arduino easy. Assembly and soldering is required!
Features:
Reset button up top
Lots of GND and +5V rails
DIP prototyping area makes it easy..
12.04€
Ex Tax:9.60€
Brand: DFRobot
Model: FIT0094
Introduction
This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch), or you can use the mounting bracket or extended mounti..
19.33€
Ex Tax:15.40€
Brand: DFRobot
Model: FIT0004
Pan and Tilt assembly for horizontal surface mount. Made using two DFRobot servo brackets. Perfect for your small remote piloted robot! Includes hardware.
It supports
Hitec 422
Hitec 311
...
.....
15.28€
Ex Tax:12.18€