Brand: Pololu
Model: POLO/2736
Description: The LSM6DS33 combines a digital 3-axis accelerometer and 3-axis gyroscope into a single package. The sensor provides six independent acceleration and rotation rate readings whose sensitivities can be set in the ranges of ±2 g to ±16 g and ±125°/s to ±2000°/s, available through..
20.19€
Ex Tax:16.09€
Brand: Pololu
Model: POLO/2862
Description: The MinIMU-9 v6 is an inertial measurement unit (IMU) that packs an
LSM6DSO 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis
magnetometer onto a tiny 0.8″ × 0.5″ board. An I²C interface accesses
nine independent rotation, acceleration, and magnetic measurements..
30.26€
Ex Tax:24.11€
Brand: Pololu
Model: POLO/5072
Description: The Motoron M3H550 Triple Motor Controller makes it easy to control DC
motors from a Raspberry Pi (Model B+ or newer) through an I²C interface.
Each module can independently control up to three motors, and multiple
Motoron boards can be stacked on top of the same Raspberry Pi for..
36.13€
Ex Tax:28.79€
Brand: Pololu
Model: POLO/2806
Description: The Pololu 4-Channel RC Servo Multiplexer can be used with standard hobby radio control systems and servo controllers to allow easy switching of servo control between two independent sources using a separate auxiliary channel as the input selector. This makes it ideal for applications i..
24.19€
Ex Tax:19.27€
Brand: Pololu
Model: POLO/2565
Description: This powerful boost regulator efficiently generates an output voltage of 5 V from an input voltage as low as 2.9 V while allowing an input current as high as 5 A.
Features:
Input voltage: 2.9 V to VOUT
Fixed 5 V output with 4% accuracy
5 A swit..
48.48€
Ex Tax:38.63€
Brand: Pololu
Model: POLO/2116
Desciption: These boost (step-up) voltage regulators generate higher output voltages from input voltages as low as 2.5 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) and have a typical efficiency between 80% to 90%. The available output..
10,119.96€
Ex Tax:8,063.71€
Brand: Pololu
Model: POLO/3750
Description: This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink. The drivers offer basic curr..
101.11€
Ex Tax:80.56€
Brand: Pololu
Model: POLO/3172
Description: The Pololu USB AVR Programmer v2.1 is a compact, low-cost in-system programmer (ISP) for AVR microcontrollers from Atmel (now a part of Microchip). The programmer provides an interface for transferring a compiled AVR program from your computer to the target AVR’s non-volatile memory, al..
30.26€
Ex Tax:24.11€
Brand: Pololu
Model: POLO/1057
Description: The HD-1501MG is a great high-quality, standard-size servo that features metal gears and two ball bearings and can deliver a tremendous amount of torque for a servo this fast. The lead is terminated with a standard “JR”-style connector, which is Futaba-compatible. The picture below show..
28.24€
Ex Tax:22.50€
Brand: Pololu
Model: POLO/1207
Description: This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing for a holding torque of 650 g-cm (9 oz-in). The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue conn..
28.24€
Ex Tax:22.50€
Brand: Pololu
Model: POLO/3138
Description: The Tic T249 USB Multi-Interface Stepper Motor Controller makes basic
control of a stepper motor easy, with quick configuration over USB using
our free software. The controller supports six control interfaces:
USB, TTL serial, I²C, analog voltage (potentiometer), quadrature
enc..
80.46€
Ex Tax:64.11€