Brand: Pololu
Model: POLO/1932
This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. You can use a crimping tool to attach these connectors..
3.64€
Ex Tax:2.90€
Brand: Pololu
Model: POLO/1933
This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. You can use a crimping tool to attach these connectors..
3.64€
Ex Tax:2.90€
Brand: Pololu
Model: POLO/2172
This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This female Tamiya connector has 10cm 14-AWG leads wit..
2.63€
Ex Tax:2.10€
Brand: Pololu
Model: POLO/2173
This style of high-current connector is commonly used with the 7.2V battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This male Tamiya connector has 10cm 14-AWG leads with stripp..
2.63€
Ex Tax:2.10€
Brand: Pololu
Model: USB/1129
This Mini-USB cable is extremely thin (2mm diameter), light, and flexible, which makes it easier to use than bulkier cables that tend to take up more desk space and pull small devices off tables. It is six feet long (1.8 m) and has a male Type-A connector and a male Mini-B connector. Note that this ..
2.99€
Ex Tax:2.38€
Brand: Pololu
Model: Mounting Hub/1203
The Pololu universal aluminum mounting hub allows you to mount custom wheels and mechanisms to 5 mm motor shafts. The hubs are sold in pairs. The set includes one Allen wrench and two 4-40 set screws for securing the hubs to motor shafts. Each hub has four mounting holes for 4-40 screws (not include..
10.12€
Ex Tax:8.06€
Brand: Pololu
Model: POLO/1083
The Pololu universal aluminum mounting hub allows you to mount custom wheels and mechanisms to 6 mm motor shafts. The hubs are sold in pairs, and each hub includes two 4-40 set screws for securing a motor shaft to the hub. The set includes one Allen wrench and two 4-40 set screws for securing the hu..
12.85€
Ex Tax:10.24€
Brand: Pololu
Model: POLO/2586
Description: This board breaks out the VBUS, GND, D-, D+ and ID pins of a USB Micro-B connector. The VBUS and GND pins can be used to power your project from USB, while the D- and D+ pins give you access to the USB’s differential data signal. Each of these pins, along with the ID pin, are broken out..
2.28€
Ex Tax:1.81€
Brand: Pololu
Model: VNH5019/1451
This carrier board for ST’s VNH5019 motor driver IC operates from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak). It works with 2.5 to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback (an analog voltage proportional to the motor current). Along..
36.69€
Ex Tax:29.23€
Brand: Pololu
Model: POLO/1090
This custom-designed white plastic wheel has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on our micro and mini metal gearmotors as well as the Solarbotics metal gear motors. Teeth on the hub optionally allow a reflectance sensor to be used for encoder f..
8.10€
Ex Tax:6.45€
Brand: Pololu
Model: POLO/1337
Overview: The Pololu Wixel is a general-purpose programmable module featuring a 2.4 GHz radio and USB. The Wixel is based on the CC2511F32 microcontroller from Texas Instruments, which has an integrated radio transceiver, 32 KB of flash memory, 4 KB of RAM, and a full-speed USB interface. A total of..
22.16€
Ex Tax:17.66€
Brand: Pololu
Model: POLO/2500
Overview: The Wixel shield seamlessly enables a wireless link (with a typical range of ~50 feet) to duplicate the functionality of your Arduino’s USB interface, which means you can use the standard Arduino computer software to:
wirelessly program the Arduino (this feature does not work on the ..
14.07€
Ex Tax:11.21€