Brand: Pololu
Model: POLO/2223
This is a rechargeable 6.0 V NiMH battery pack with a capacity of 2200 mAh. The pack consists of five AA cells in a single row and a 4" lead terminated by a “JR”-style connector.
This battery pack comes with 4" leads terminated by a 3-pin “JR”-style female connector (only two of the pins are used..
20.44€
Ex Tax:16.29€
Brand: Pololu
Model: POLO/2225
This is a rechargeable 7.2 V NiMH battery pack with a capacity of 2200 mAh. The pack consists of six AA cells in two rows and a 4" lead terminated by a “JR”-style connector.
This battery pack comes with 4" leads terminated by a 3-pin “JR”-style female connector (only two of the pins are used). Th..
22.47€
Ex Tax:17.90€
Brand: Pololu
Model: POLO/727
The Pololu serial 8-servo controller allows you to control up to eight RC servos with almost any robot controller or computer. The interface to the servo controller is a standard RS-232 serial port or a TTL-level serial line, using any baud rate between 1200 and 38400 baud. Multiple 8-servo controll..
30.57€
Ex Tax:24.35€
Brand: Pololu
Model: POLO/779
This is a great 6-inch (150-mm) board-to-board cable for devices that have 0.1" 3-pin male header connectors, such as RC servo controllers, RC receivers and motor controllers. It can also be a convenient way to connect various sensors to a robot controller...
4.00€
Ex Tax:3.19€
Brand: Pololu
Model: POLO/2170
This 3-wire harness can be used to add a toggle switch between any two devices that can be connected with “JR” style servo connectors. One side of the switch has a lead with a female connector, while the other side has two leads, one male and one female.
We sell two versions of this harness:
..
5.01€
Ex Tax:3.99€
Brand: Pololu
Model: POLO/2171
This 18" (45 cm) harness has an inline on/off switch, with a 0.1" 3-pin female connector on one end and both a male and a female connector on the other.
This 3-wire harness can be used to add a toggle switch between any two devices that can be connected with “JR” style servo connectors. One side ..
6.02€
Ex Tax:4.80€
Brand: Pololu
Model: POLO/788
This 12-inch (300-mm) Y-cable has “JR” style connectors on all ends and is typically used to connect two servos to one servo port. As such, it has a single female and two male connectors (though in the RC hobby industry female connectors are often referred to as “male” and vice versa)...
7.03€
Ex Tax:5.60€
Brand: Pololu
Model: POLO/1372
The Pololu Simple Controller 18v7 makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operate..
171.96€
Ex Tax:137.02€
Brand: Pololu
Model: POLO/1405
This single-pole, double-throw (SPDT) switch can be used as a general-purpose micro switch or tactile obstacle-detector for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 mm (0.79" x 0.25" x 0.40"), and the 15.6mm (0.61") lever arm has a semicircular bump at the tip that simulates a roll..
2.33€
Ex Tax:1.85€
Brand: Pololu
Model: POLO/1404
This single-pole, double-throw (SPDT) switch can be used as a general-purpose micro switch or tactile obstacle-detector for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 mm (0.79" x 0.25" x 0.40"), and the 16.3mm (0.64") lever arm has a roller at the tip. This three-pin switch can also ..
2.43€
Ex Tax:1.94€
Brand: Pololu
Model: POLO/1402
This single-pole, double-throw (SPDT) switch can be used as a general-purpose micro switch or tactile obstacle-detector for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 mm (0.79" x 0.25" x 0.40"), and the lever arm is 16.7 mm (0.66") long. This three-pin switch can also be used as a tw..
2.33€
Ex Tax:1.85€
Brand: Pololu
Model: POLO/1403
This single-pole, double-throw (SPDT) switch can be used as a general-purpose micro switch, but the 2"-long lever arm makes it especially useful as a simple tactile obstacle-detector for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 mm (0.79" x 0.25" x 0.40"), and the lever arm is 50 mm..
2.43€
Ex Tax:1.94€